3 replies to this topic

[Keeper0fwar]

Hello!


So, me being the absolutely noob at modding that I am, need some help with my strongarm.

I took it apart, did a very basic rear-loading mod, and put it back together, only to find that it wasn't catching. Upon further investigation, it seems that the priming handle (where you pul back to prime the blaster.) Wasn't catching the plunger rod. Help?


Thanks.


EDIT---

Got the blaster working, only to discover that when I did the rear-loading mod had completely destroyed the seal on three of the dart chambers. thanks for the help, though.

Edited by Keeper0fwar, 20 May 2015 - 10:01 PM.

[LordGiratia]

Pictures would help.

[Keeper0fwar]

Issue is, brother has my camera at his house. Will attempt to get pics if possible.

The main issue (I believe) is that when I fire, the priming rod doesn't go all the way back, meaning the small wings on the priming rod don't collide with the triangles on the priming handle, causing it to miss, and not be able to pull back.

[ravetrooper]

Make sure you put that piece in the back that really wants to jump out (you know which one) back in correctly. Even if you get it back in if the spring underneath it is not set properly, the blaster won't prime. I've had this problem before when I was trying a spring replacement.

Edited by ravetrooper, 20 May 2015 - 09:12 PM.