3 replies to this topic

[X20AStrikefreedom]

Sorry fir the long winded explanation and question though. but here goes:

I don't know if anyone made a post about this but since I have a stampede and hade four 18650 battery holders installed into the stock battery tray and about to do further modding to the blaster itself, and am looking for a replacement motor that can take 14.8 volts, I was just wondering, what is the name of the recommended replacement motor for the stampede and where can I get it?

Thanks

[therealnerfjunkies]

I have seen stampede motors take 18 volts. I think you're good.

[Aeromech]

I have poured 36 volts through a Stampede motor. I didn't really use the blaster, as it was more of an experiment to see how much the motor could take. My setup would have eventually worn the motor down, but yours is much more reasonable.

14.8V is 164% what the motor accepts in stock form. I was pushing almost 400% through it. You can keep the stock motor, but your lifespan may decrease slightly.

[Zorns Lemma]

There is no "one" recommended replacement motor. It depends on what you're doing (if you need to replace at all) and what you can find. This is not a Q&A forum. Please do your own research.

Look what I found using 30 seconds of Google:
http://nerfhaven.com...showtopic=23058
http://nerfhaven.com...showtopic=20674