This topic is locked
well i, i have no money at the moment, and i had a bunch of scrap parts laying around and i need a nerf gun for a war that im having this saturday. so the H-1 was born.
now i believe the plunger tube is 1 1/4" schd 40 pvc pipe. on the end of the plunger tube is a 1 1/4" coupler and inside that is a 1 1/4" x 1" bushing. and inside of the bushing is a 3/4" x 1/2" reducer. this was how i got the air to the barrel.
As you can see there is a grey 3/4" electrical con duet pipe inside the reducer. well i got lucky and found that end part so the 1/2" pvp pipe coupler fits perfectly inside there. and well from there it is just 1/2" pvc pipe with two elbows and then it goes to the barrel.
now onto the plunger.
Well I used the usual method of a HAMP, except this worked out a little different for me. I used yarn and duct tape for the actual plunger part, but I had two scrap pieces of pvc pipe laying around. I'm not totally sure on the size. All I know is the the plunger head was on pvc pipe that is inside another piece of pvc pipe. So I don't really know how the plunger head is built in an actual HAMP, but mine has a stopper to prevent the yarn from slipping, also i used plastic welder to keep these together.
Next is how I get a dart into the barrel. Well first thing is, im using 1/2" pvc pipe and well i don't usually use that as barrel material because of the really tight fit of the dart. So I could just shove the dart in the front and fire, or i use a ram rod that i found to be really handy.
I would just vacuum load it but... for some reason it wont vacuum load. I think it is because of suck tight barrel. Any suggestions on why it won't vacuum load?
Here is a size comparison with my Longshot shell
ranges:
(with no wind)
55'
58'
60'
63'
65'
66'
so it is hitting the 55'-65' range, and there was no tilt on the gun. So is that good for a HAMP? What would i have to do to make this vacuum loading, or maybe put some type of breach on it (and im now good with making breaches so), and also to increase the range to like 75'-85'? Well I am open for opinions, suggestions.
