Edited by TheJoker, 20 April 2010 - 08:26 PM.
Titan Problem
Started by TheJoker, Apr 20 2010 08:25 PM
2 replies to this topic
#1
TheJoker
-
- Members
- 12 posts
Member
Posted 20 April 2010 - 08:25 PM
So my Titan has been leaking lately, even though the only thing I've done was make a shotgun barrel. I havent messed with any of the tubing on it, but it has been leaking. After searching, I decided to try to submerge it in water to see where it was leaking. Its leaking from the hole where the firing pin is. Is there any way to fix this, or is it just broken for good?
QUOTE(Spaztic_75 @ Oct 20 2003, 05:36 PM) 
I've always prefered cocks simply because their easier to modify and they take less time to shoot because you don't need to pump like 20 times to shoot."
#2
Hi Yah
-
- Members
- 294 posts
Member
Posted 20 April 2010 - 09:57 PM
I've heard of people fixing this problem by lubing the pin and then putting goop on it.
The yellow balls are also slightly smaller in diameter than the green ones.
#3
crazeelax608
-
- Members
- 6 posts
Member
Posted 20 April 2010 - 10:18 PM
I had the same problem.
I simply put a lot of hot glue all around the leaking hole, but i moved the firing pin back and forth until the glue completely dried so it didn't get stuck. This completely fixed the problem for me.
I simply put a lot of hot glue all around the leaking hole, but i moved the firing pin back and forth until the glue completely dried so it didn't get stuck. This completely fixed the problem for me.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
