3 replies to this topic

[Rylan]

I recently bought a Vulcan and noticed something different about this one than my first one

(I dont know how to post pix)
hows this
http://sites.google....?attredirects=0
http://sites.google....?attredirects=0
http://sites.google....?attredirects=0

Try going to my webpage:
My Webpage

The problem is that I can only do the 50 dart belt mod if one belt is upside down- it still works- but I cant do 100 dart belt mods
can someone post a mod to solve this even if it ends up removing a cartridge or two like a 98 dart belt mod
also, the one cartridge is green, it's dumb I know

Edited by Rylan, 19 January 2010 - 09:33 PM.

[pjotrkuh]

I tried to connect two belts without the "blank" in the middle but it was no succes, the distance between the 2 barrels must be perfect or else it will jam.

Edited by pjotrkuh, 19 January 2010 - 12:34 PM.

[automaton]

My vulcan had the same belt (with the green dummy). It modded just fine. The additional belts you buy have two dummies (one on each end), so you can still make a belt as long as you like. The belt included with the Vulcan just has to be the last in line.

The only inconvenience is that if you intend to make an endless loop, you can't use the belt that comes with the Vulcan, they all need to be "Belt Refills". Nothing serious.

[flamingeyes245]

I pried off the piece over the cloth strip on the last link, took the dummy off the second chain, fed the cloth through the slot(doubling up the cloth) and glued the cover back down.
It works wonderfully and has no dummy shells in the middle.