
This thing here. The unorignal named Foam Dart gun.

Out of the packet now and it looks nice, but way to realistic for my liking. Its fairly small and light, but i find my finger only just fits in the trigger guard. Its primed by pulling back the slide.

It comes with 6 decent red suction cup darts. as you can see there, the little piece inside the handle can hold 2 darts.
Stock, this thing can fire about 16 feet. I'd better fix that.

Start by removing the screws, and don't forget this one hidden under the slide.

And we're in. As you can see, it has an inverted plunger simmilar to a maverick.

If i put the two together, you can see that they are the same length, but the maverick one is wider. This photo was taken after the mod, so thats why the plunger suddenly changed.

Now I could have just drilled out the peg inside the stock barrel, but if I had the dart fit would have been very loose, becasue the stock barrel grips the dart on the inside. Also thats where the air is delivered. But I chose to rebarrel it. For the new barrel I'm using 8cm (thats about 3 inches) of Hep20. It was just an off cut i had lying around, which still had the sticker on it.
Now I'd better take a moment to explain what Hep20 is, because i'm sure almost none of you on here have never heard of it. Basicly its a flexable Polybutylene tubing with an outer diamater of 16mm and an internal diamater much like 17/32 brass. Though its flexable you don't have to worry about it bending at this length. For this mod, its external diameter is pretty much the same as the stock barrel.

Moving on now. You will need the rubber washer piece off the back of the stock barrel

Then glue it to the back of your new barrel. I used 2 part Epoxy glue here.

when its all dried you need to put the plunger back and then work out where the new barrel sits. Glue the barrel onto the shell of the gun to stop it flying out when its fired. The stock barrel had a ridge that held it in place at the front .

Now here's the most important step. before you put it back together, give it an eye raping paintjob.
With a new barrel it hits about 30-35 feet using tagger darts.