10 replies to this topic

[b3nsonx]

hi, so im kinda new to modifying nerf guns, i have 2 nite finders that already have the air restrictors removed.
now my next project is this titan, and i was wondering if its possible to just take off the 2 restrictors without using a pvc pipe. Im referring to the big external barrel, and the smaller one that can only be seen when the external barrel is removed. the reason why i ask is because i seached and it seems people are using pipes and such, but i just want to keep it simple and basic.
would there be any improvement in the gun's performance? and also would it remain accurate?
thanks

[cannotaim]

Putting PVC is to make the titan shoot darts, not the missile. If you still want it to shoot missiles you don;t need the PVC.

[Hi Yah]

Just cut the grates on the barrel and the part where the barrel screws on.

[b3nsonx]

oh, i see.
thanks guys.
how much of a difference would you notice by doing this simple mod?

[rbtying]

I'd guess somewhere between 2 and 7 feet, average. The Titan has such huge volume I don't think the AR's really affect the airflow that much, just keep things from falling in and getting fired at little kids. Is there a particular reason you want to avoid PVC? PVC rebarreling is pretty easy, especially on a Titan.

[stuck by stefan]

If you want to make it shoot darts, you could use the tubes of crayola markers.

[Fome]

oh, i see.
thanks guys.
how much of a difference would you notice by doing this simple mod?

Very, very little.

[flamincows]

If you want to increase the range of the missile just plug the over pressure release valve on the pump.
The missile shoots absurdly far, but because of the hollow tip it still wouldn't hurt a small child at thirty pumps.

[Possemhunter]

If you want to increase the range of the missile just plug the over pressure release valve on the pump.
The missile shoots absurdly far, but because of the hollow tip it still wouldn't hurt a small child at thirty pumps.

How exactly do you know this?

How close was the poor kid?

I'm scared

And yes it's worth cutting out the ar's to shoot other things

[ArsenicAnarchy]

If you want to make it shoot darts, you could use the tubes of crayola markers.

Or an old recon mechanism. Thats what I used.

[BritNerfMogul]

I did mine with spare brass:

http://www.nerfhq.co...g99992#msg99992