Titan Mod Without Pvc Pipes?
#1
Posted 19 August 2009 - 05:53 PM
now my next project is this titan, and i was wondering if its possible to just take off the 2 restrictors without using a pvc pipe. Im referring to the big external barrel, and the smaller one that can only be seen when the external barrel is removed. the reason why i ask is because i seached and it seems people are using pipes and such, but i just want to keep it simple and basic.
would there be any improvement in the gun's performance? and also would it remain accurate?
thanks
#2
Posted 19 August 2009 - 06:15 PM
Nerflovers
#3
Posted 19 August 2009 - 06:32 PM
#4
Posted 19 August 2009 - 06:34 PM
thanks guys.
how much of a difference would you notice by doing this simple mod?
#5
Posted 19 August 2009 - 06:54 PM
#6
Posted 19 August 2009 - 07:29 PM
This is the NerfHaven profile of Northeast Designs. For more info visit https://www.facebook...p8OwIso&fref=nf
Old school Nerf engineer since 2008
#7
Posted 19 August 2009 - 08:43 PM
oh, i see.
thanks guys.
how much of a difference would you notice by doing this simple mod?
Very, very little.
#8
Posted 19 August 2009 - 11:24 PM
The missile shoots absurdly far, but because of the hollow tip it still wouldn't hurt a small child at thirty pumps.
#9
Posted 20 August 2009 - 07:13 AM
If you want to increase the range of the missile just plug the over pressure release valve on the pump.
The missile shoots absurdly far, but because of the hollow tip it still wouldn't hurt a small child at thirty pumps.
How exactly do you know this?
How close was the poor kid?
I'm scared
And yes it's worth cutting out the ar's to shoot other things
#10
Posted 20 August 2009 - 04:17 PM
If you want to make it shoot darts, you could use the tubes of crayola markers.
Or an old recon mechanism. Thats what I used.
#11
Posted 20 August 2009 - 05:13 PM
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users