4 replies to this topic

[happybiscuit]

When I pull back my bbb, it doesn't lock into position. I have to keep it back and then pull the trigger. I looked at the internals directory and didn't notice anything wrong about how I put it together. Thank you!

[Dr BoB]

The only thing I can think of is you forgot to put the orange nubs with the springs into the sides. I have no pics but it should be right in the middle of the holes(one on each side). If you lost these then your out of luck.

[happybiscuit]

Dr. BoB, on Jul 26 2009, 10:48 PM, said:

The only thing I can think of is you forgot to put the orange nubs with the springs into the sides. I have no pics but it should be right in the middle of the holes(one on each side). If you lost these then your out of luck.

Thanks for the help! I'll take them out of the trash right now! I think a mod told me to take them out.

[Captain]

One thing you should always do before tossing a piece in the trash is figure out it's function! If you don't know what purpose a part serves, it's best to keep it where it is.

[Judging Eagle]

Captain, on Jul 26 2009, 11:45 PM, said:

One thing you should always do before tossing a piece in the trash is figure out it's function! If you don't know what purpose a part serves, it's best to keep it where it is.

I'd agree.

I end up keeping my pieces, because I might need them for something else; or I might find a way to re-integrate them in a useful manner.

Also, don't get too stuck on what a mod says. Be willing to take risks. You might find a new way to do something.

Of course, with risks, come mistakes. :/