#1
Posted 20 February 2009 - 04:19 AM
Part I - Longshot Modifications
Go here to learn how to do everything necessary for the Longshot Portion of the gun.
Hack off the front part so it looks like this.
Part II - Big Salvo Readying
Hack off the stock barrels as close to the tanks as possible. Sand down the tops of the tanks. Glue a segment of PVC on the sanded down surface of the tank where the stock barrels were hacked off.
Wrap e-tape around some smaller plastic tube and shove it in there to minimize dead space.
Glue on a coupler.
Part III - Barrel Installment
To make the barrels straight I used PVC glued parralel to that extruded box thing that contains the name of the gun. Lemme show you what I mean.
See how this piece of PVC is perfectly straight when pushed up against the edge of that box?
Glue two segments of PVC on the edges of that box. Reinforce with hot glue or putty as necessary.
Glue, in between these two pieces, 12" of PETG nested in PVC. In the Picture one of the Salvo tanks are attached. Also reinforce with hot glue.
Now do all this to the other side.
For the final barrel we will use the tactical rail. The reason the barrel isn't just glued directly to the rail is because then the tank would obstruct aiming. The CPVC helps push it farther away from the gun. Glue a segment of CPVC on as shown.
Now glue another piece of CPVC on that is up aggainst the other piece. Then glue the barrel on, cradled by the CPVC segments.
Part IV - Trigger and Foregrip Assembly
First let's fuck with the LSFG handle. Open 'er up and make all the changes that have been made in the following images.
Extend the slot.
Extend this slot too.
Dremel down the area that the trigger moves into as shown.
Make that little slice that's in the middle of the photo.
Make those slanted cuts on the trigger and glue a longer spring in.
#2
Posted 20 February 2009 - 04:20 AM
Now do this all to the other half, except for some components that don't carry over. If you haven't noticed, this all increases the trigger stroke.
Now super glue the handle down.
Add epoxy puddy. I accidentilly picked up epoxy paste at the store, but that also worked, althought it was basically just gooeyer epoxy.
And of course add hot glue.
Now find some way to link the SMDTG trigger to the LSFG trigger.
Glue the SMDTG trigger in as shown
Part V - Finishing the Marvelous Salvo
Basically just connect all the tubing and add a pump. Here are some pics.
Yay, you have a clusterfucked Longshot!
#3
Posted 20 February 2009 - 04:32 AM
Lemme guess, you're the only one that can actually work it right?
Same with mine.
I like it, mad fucking props, etc.
<3
#4
Posted 20 February 2009 - 05:51 AM
Mind13
#5
Posted 20 February 2009 - 07:15 AM
1.Do you still use the orginial bolt to prime the Longshot?
2.How hard is it to pump and shoot the Marvelous Salvo?
#6
Posted 20 February 2009 - 08:56 AM
#8
Posted 20 February 2009 - 09:15 AM
#9
Posted 20 February 2009 - 10:02 AM
SGM's Shred Shop -Mod Service
NerfHaven's resident drama queen.
#10
Posted 20 February 2009 - 10:11 AM
Apparently you wanted a linked trigger though, which is kinda nice too.
Great job.
#11
Posted 20 February 2009 - 10:26 AM
nerfer34, on Feb 20 2009, 10:11 AM, said:
Cool, but wouldn't have been better if you just did the marvelous salvo integration? ( seperate trigger, no speedloaders).
Apparently you wanted a linked trigger though, which is kinda nice too.
Great job.
What's linked about the triggers? This uses the same trigger as a Marvelous Salvo, but it has it attached to the LSFG handle to make it more comfy.
SGM's Shred Shop -Mod Service
NerfHaven's resident drama queen.
#12
Posted 20 February 2009 - 10:34 AM
I'm not sure I've ever seen another LS I liked as much as mine, but you have done it.
P.S. If you wanna be nice, you could send me the 4th BS tank after you get the follower....
PM if you would.
Hehe, renegade, expect a PM.
Edited by sputnik, 20 February 2009 - 10:39 AM.
<3
#13
Posted 20 February 2009 - 10:34 AM
Dang dude, awesome work.
Edit: Wow, me and Sputnik posted at the exact same time. Cool beans.
Edited by Renegademilitia15, 20 February 2009 - 10:35 AM.
FA_24's response to Ice's back pain thread:
I used to have that problem until I got circumcised. 15 pounds later I was able to stand up straight.
#14
Posted 20 February 2009 - 11:03 AM
Seriously though, awesome job. I think it looks all the more cooler with all that stuff on it.
Great job!
#15
Posted 20 February 2009 - 11:36 AM
I beat my wife."
#16
Posted 20 February 2009 - 11:51 AM
That's about it. And thanks Angela who helped me with these pictures.. It looks huge in her hands.
HOLY CRAP!
FU ALL
#17
Posted 20 February 2009 - 12:24 PM
sputnik, on Feb 20 2009, 01:32 AM, said:
Holy Shit
m14, on Feb 20 2009, 04:15 AM, said:
Holy shit!
Icespartan_1114, on Feb 20 2009, 06:03 AM, said:
Holy shit.
Nice. I personally like the look of the unpainted PVC sometimes. If you try to paint it, it looks like you half are trying to make it look pretty, when it never will be. Right now it just looks scary. Nice.
#18
Posted 20 February 2009 - 03:37 PM
sputnik, on Feb 20 2009, 01:32 AM, said:
Holy Shit my friend, now that is a Longshot.
Lemme guess, you're the only one that can actually work it right?
Same with mine.
I like it, mad fucking props, etc.
Thanks a ton, yeah she's pretty complex.
mind13, on Feb 20 2009, 02:51 AM, said:
There are so many barrels how do you remember which onces are still loaded?
You have a point. I just guess and hope to god I'm right. Also, most of the PVC is to stabalize the barrels. There's actually only three barrels and then the LS barrel.
m14, on Feb 20 2009, 04:15 AM, said:
Holy shit! That things looks ugly. I really wouldn't want that thing pointed at me in a war. Excellent job Tantum! I have a few questions though.
1.Do you still use the orginial bolt to prime the Longshot?
2.How hard is it to pump and shoot the Marvelous Salvo?
Thanks, man.
1) Yes.
2) Easy. Right now, though, either the second trigger valve or the tank connected to that valve is disfunctional.
VelveetaAvenger, on Feb 20 2009, 05:56 AM, said:
I love guns with barrels and tubing flying everywhere. That said, I think this would look tons better if you at least painted the pvc. Unpainted pvc and cpvc always looks really tacky to me, but the important thing is that it works.
I here ya, man. Only problem is I have the potential for ventricular arithmeas. That means no aerosols.
Icespartan_1114, on Feb 20 2009, 06:03 AM, said:
Holy shit. That looks like it would be hard to aim. Marvelous Longshot anyone? Nice work. I like the inventiveness of this, nice work man.
Thanks a ton, man. I just use the tactical rail to aim, and with my set up, I don't have to worry about the barrels not being straight.
dizzyduck, on Feb 20 2009, 06:15 AM, said:
Fugly but effective. She looks like she needs a paint job, but then again every unpainted blaster looks that way to me.
I agree. Can't wait for that ablation procedure this summer!
slowguitarman, on Feb 20 2009, 07:02 AM, said:
I personally think it looks freaking beautiful. Great work, dude.
Thanks you man. It means a lot.
nerfer34, on Feb 20 2009, 07:11 AM, said:
Cool, but wouldn't have been better if you just did the marvelous salvo integration? ( seperate trigger, no speedloaders).
Apparently you wanted a linked trigger though, which is kinda nice too.
Great job.
Thank you. There aren't any speedloaders and the triggers are separate.
sputnik, on Feb 20 2009, 07:34 AM, said:
Tantum, seriously.
I'm not sure I've ever seen another LS I liked as much as mine, but you have done it.
P.S. If you wanna be nice, you could send me the 4th BS tank after you get the follower....
PM if you would.
Hehe, renegade, expect a PM.
imaseoulman only sent three. Otherwise I would, though.
Edited by TantumBull, 20 February 2009 - 03:56 PM.
#19
Posted 20 February 2009 - 03:47 PM
That things a beast!
Now, to find a way to make it cleaner...
(thanks for fixing the coding)
Edited by Nerf Bros, 20 February 2009 - 06:12 PM.
#20
Posted 20 February 2009 - 03:57 PM
Renegademilitia15, on Feb 20 2009, 07:34 AM, said:
I love the look of that beast.
Dang dude, awesome work.
Edit: Wow, me and Sputnik posted at the exact same time. Cool beans.
Thanks, man.
flyingchicken, on Feb 20 2009, 08:03 AM, said:
That longshot is marvelous! (bad pun)
Seriously though, awesome job. I think it looks all the more cooler with all that stuff on it.
Great job!
Thank you.
Norther_of_Heaven, on Feb 20 2009, 08:36 AM, said:
Thats just freaking cool. Props.
Thanks.
#21
Posted 20 February 2009 - 04:02 PM
#22
Posted 20 February 2009 - 04:16 PM
k9turrent, on Feb 20 2009, 08:51 AM, said:
Good job, That's FrankenMod, my ls, I but I haven't posted a write-up cause I'm wait it to warm up out side to spraypaint. but mine looks prettier than your's.
Yours is integrated with a salvo as well? Nice! Can't wait to see it. And thank you.
UpperHand, on Feb 20 2009, 09:24 AM, said:
sputnik, on Feb 20 2009, 01:32 AM, said:
Holy Shit
m14, on Feb 20 2009, 04:15 AM, said:
Holy shit!
Icespartan_1114, on Feb 20 2009, 06:03 AM, said:
Holy shit.
Nice. I personally like the look of the unpainted PVC sometimes. If you try to paint it, it looks like you half are trying to make it look pretty, when it never will be. Right now it just looks scary. Nice.
Thanks. Like I said before, I can't paint it.
Nerf Bros, on Feb 20 2009, 12:47 PM, said:
WOW!
That things a beast!
Now, to find a way to make it cleaner...
(Hey tantum preview your post next time!)
Thanks. I was in a rush. The mother was yelling.
VelveetaAvenger, on Feb 20 2009, 01:02 PM, said:
I have a question about the loading. Are you just ramroding it, or do you take the tanks off the barrels to rear load?
I originally designed it for rear loading, but I think ramrodding might be more practical.
#23
Posted 20 February 2009 - 05:08 PM
Kruger and Dunning (1999)
#24
Posted 20 February 2009 - 05:16 PM
I'm really disappointed with imaseoulman, though. It is very obvious that he didn't test the merchandise that he sold me. After reading other peoples' recent experienced with him, I think he may have just overbooked himself and had to rush, or decided "screw it, I'm leaving anyway."
#25
Posted 20 February 2009 - 05:20 PM
Brings back good memories.
Great job, I like the stabilization. I can see that thing being feared at many wars to come.
Edited by mystefansdontflystraight, 20 February 2009 - 05:22 PM.
It's just screaming to be rearloading...
I seen a movie about that once.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users