#1
Posted 04 January 2009 - 10:47 PM
Supplies Needed:
-Hot Glue/Hot Glue Gun
-Mega Missile
-PETG (6 Inches)
-PVC (2-1/2 Inches)
-Airtech 2000 Turret
-E-Tape (Optional)
-A dremel, knife, razor, or mini-saw
Okay so here's a picture of it in the box.
Take your sharp object of choice and cut off the stock barrel.
Wrap your PETG up in some e-tape, or just glue it straight in to the peice of PVC.
Glue the peice of PETG nested in PVC where the stock barrel used to be.
Now on the end of the 2K turret, where it used to be attatched to the 2K tank, there is a little nub. Glue that into the PETG. The end result should look something like this.
As for ranges, I haven't tested outside yet, but they're definitly above 100FT for ea barrel. My friend has one with a 4 or 5 inch CPVC barrel, and it goes 95FT flat. It barely pierces through cardboard. Each barrel on mine pierces through cardboard, so i'm going to estimate about 100-110FT flat.
Questions? Comments? Flames?
#2
Posted 04 January 2009 - 10:51 PM
Church... gotta soak up that Jesus!
NERFSTRONG #51
#3
Posted 04 January 2009 - 10:51 PM
That is all.
Otherwise: Very clean and well done writeup. Easy to follow and easy to replicate. Fun blaster to mod with good results.
Edited by xeorogue, 04 January 2009 - 10:55 PM.
Salindin
#4
Posted 04 January 2009 - 10:56 PM
Yeah, not really. I may have forgotten to mention that the dart gets ramrodded down to right infront of the chamber. It goes through the original barrel and the 2k turret.Comment? Sooo much dead space between the turret and the actual chamber. This could effect ranges negatively so I'm gonna say it gets less then your friends 5inch CPVC if his is singled.
That is all.
Edit: Yes, it is a fun blaster.
Edited by NerfOnFier, 04 January 2009 - 10:56 PM.
#5
Posted 04 January 2009 - 11:03 PM
Yeah, not really. I may have forgotten to mention that the dart gets ramrodded down to right infront of the chamber. It goes through the original barrel and the 2k turret.Comment? Sooo much dead space between the turret and the actual chamber. This could effect ranges negatively so I'm gonna say it gets less then your friends 5inch CPVC if his is singled.
That is all.
Edit: Yes, it is a fun blaster.
So you have a turret with 4 darts, but between shots you have to pump and ramrod?
Why have a turret? Ramrodding a dart that's already in the chamber is practically equivalent(when comparing ROF) to putting another one in.
Salindin
#6
Posted 04 January 2009 - 11:11 PM
Yeah, not really. I may have forgotten to mention that the dart gets ramrodded down to right infront of the chamber. It goes through the original barrel and the 2k turret.Comment? Sooo much dead space between the turret and the actual chamber. This could effect ranges negatively so I'm gonna say it gets less then your friends 5inch CPVC if his is singled.
That is all.
Edit: Yes, it is a fun blaster.
So you have a turret with 4 darts, but between shots you have to pump and ramrod?
Why have a turret? Ramrodding a dart that's already in the chamber is practically equivalent(when comparing ROF) to putting another one in.
You also have to note that this gun specifically wasn't intended for a primary for a major war. For a local war, in my opinion a fairly small 4 shotted gun that takes roughly 10 seconds to load and about 4 seconds per shot is pretty good. Loading all four in at once, and using a secondary for backup incase anyone rushes. Yes it isn't practical for most, but for me it's pretty good. For anyone who asks why not use your crossbow and turret it, it's because using the same gun over and over gets boring, plus my crossbows are big. =/
#7
Posted 04 January 2009 - 11:16 PM
#8
Posted 04 January 2009 - 11:23 PM
Read the post above yours.This doesn't make any sense. Why is there a turret if your putting a dart into the original barrel after each shot. Why not just skip the turret altogether?
Edit: Also forgot to mention only tight darts need to be ramrodded, as most just drop down.
Edited by NerfOnFier, 04 January 2009 - 11:29 PM.
#9
Posted 05 January 2009 - 12:37 AM
#10
Posted 05 January 2009 - 01:02 AM
Read the post above yours.This doesn't make any sense. Why is there a turret if your putting a dart into the original barrel after each shot. Why not just skip the turret altogether?
Edit: Also forgot to mention only tight darts need to be ramrodded, as most just drop down.
If your darts DROP down the barrel, you're doing it wrong. All wrong. That means your darts are not getting a good seal against the barrel, which means your long ass barrel has no purpose.
#11
Posted 05 January 2009 - 01:31 AM
Good mod btw. Seems like everything can be made better by slapping a 2k turret onto it.
-George Orwell, 1984
-----------
Think that piece is beyond repair? Think again!
#12
Posted 05 January 2009 - 06:25 AM
On the other hand, the guy who posted before me used the word 'fuck' a lot so he probably knows what he's talking about.
#13
Posted 05 January 2009 - 07:02 AM
Because he still HAS TO RAMROD AND RETURN THE RAMROD after each shot. How much longer is pulling another dart of our your pocket/same place where your ramrod is kept?I don't see why people keep bitching about the turret! The turret is to get off 4 shots without having to reload the barrels! This will reduce the time taken to get out another dart, ramrod, and return the ramrod. Sure, after 4 shots you have to reload all of the barrels, but with its size it could be a secondary! Why is any turret worthy if this one isn't? He even said it's not meant to be used as a primary.
This is hardly a turret. More like a bad speed loader.
I'm not trying to flame the blaster/mod. It's a good mod, and i like the blaster. It fits its roll as a secondary well.
Salindin
#14
Posted 05 January 2009 - 07:36 AM
A bad speed loader? It's a retarded waste of a 2k turret.and theres no way the dart fits through the tiny spaces in the 2k turret so it can actually go through to the rest of the barrel. As far as I can see, your a terrible liar (directed towards the maker of the thread).Because he still HAS TO RAMROD AND RETURN THE RAMROD after each shot. How much longer is pulling another dart of our your pocket/same place where your ramrod is kept?
This is hardly a turret. More like a bad speed loader.
I'm not trying to flame the blaster/mod. It's a good mod, and i like the blaster. It fits its roll as a secondary well.
Edited by ice, 05 January 2009 - 03:45 PM.
Turd stefans. When I pulled these out of the pillow case i was just like, what... the... fuck...
Muker
<!--QuoteEnd--></div><!--QuoteEEnd-->
#15
Posted 05 January 2009 - 07:39 AM
ON topic
Great mod, but i don't understand one part, do you back load it, or front load it and then ramrod?
#16
Posted 05 January 2009 - 03:42 PM
I guess I skipped over this bit, so I retract my comment about the people attacking the turret.
On the other hand, the guy who posted before me used the word 'fuck' a lot so he probably knows what he's talking about.
#17
Posted 05 January 2009 - 06:04 PM
Is there any thing you don't have/haven't modded?nice mod. I did the same to mine
<picture of 2k+mm>
On topic: Is the barrel a telescoping barrel? Or are they the same wall thickness?
Edit: Coop, are you still getting out of nerf? It doesn't seem like it.
Edited by TheNerfLoki, 05 January 2009 - 06:05 PM.
TNL,
#18
Posted 05 January 2009 - 06:17 PM
Read the post above yours.
Yeah, I did. It still makes no sense. Let me explain to you how you have explained it to everyone else. I'm not sure if this is the way it is, but this is how everyone's interpreting it:
To Load minus the pumping part:
1) Load dart into ORIGINAL barrel.
2) Shoot. Dart goes through turret whose holes have been drilled out to fit a dart, which has also rendered their seal useless.
3) Load dart into original barrel... yada yada rinse and repeat.
So basically, you're not even using the fucking turret.
I hope to god how you explained it to everyone isn't how it actually is, becaue then you'd be fucking retarded.
#19
Posted 05 January 2009 - 06:33 PM
Read the post above yours.
Yeah, I did. It still makes no sense. Let me explain to you how you have explained it to everyone else. I'm not sure if this is the way it is, but this is how everyone's interpreting it:
To Load minus the pumping part:
1) Load dart into ORIGINAL barrel.
2) Shoot. Dart goes through turret whose holes have been drilled out to fit a dart, which has also rendered their seal useless.
3) Load dart into original barrel... yada yada rinse and repeat.
So basically, you're not even using the fucking turret.
I hope to god how you explained it to everyone isn't how it actually is, becaue then you'd be fucking retarded.
No. He's saying he loads the darts to the bottom of the turret. then ramrods the dart down the whole length of the barrel, fires, rotates the barrel ramrods THAT dart down the whole length of the barrel, fires, repeats etc etc.
It's pointless, because you still have to ramrod, and you're not going to be getting a good seal where the turret is, especially if he's telling the truth when he talks about his darts DROPPING down the barrel. Your darts should NEVER do that.
#20
Posted 05 January 2009 - 07:51 PM
#21
Posted 05 January 2009 - 07:55 PM
No. He's saying he loads the darts to the bottom of the turret. then ramrods the dart down the whole length of the barrel, fires, rotates the barrel ramrods THAT dart down the whole length of the barrel, fires, repeats etc etc.
It's pointless, because you still have to ramrod, and you're not going to be getting a good seal where the turret is, especially if he's telling the truth when he talks about his darts DROPPING down the barrel. Your darts should NEVER do that.
Thanks, now I understand. He never really explained that at all. It would have made so much more sense for him to use the turret how it's supposed to be fucking used as close to the power source as possible. All in all a complete waste of the PETG segment he uses as his actual "barrel."
Edited by TantumBull, 05 January 2009 - 07:56 PM.
#22
Posted 05 January 2009 - 08:23 PM
#23
Posted 05 January 2009 - 08:56 PM
Excuse me for my rudeness (comment removed). I'll believe this isn't complete shit when I see a video of it and the way you use it, but it will more likely just prove my/our point.nice clean mod good job!
Edited by ice, 06 January 2009 - 03:06 PM.
Turd stefans. When I pulled these out of the pillow case i was just like, what... the... fuck...
Muker
<!--QuoteEnd--></div><!--QuoteEEnd-->
#24
Posted 05 January 2009 - 10:13 PM
#25
Posted 06 January 2009 - 12:14 AM
Why do you guys insist of cussing on a forum? Do you think that makes you guys look big on the internet? I understand when the Admins or Mods do because, well, they can. It's their forum.One. Ice, who the fuck said you can speak? Two, i'm redoing it to make it more effective, so you all the bitches in this thread will shut the fuck up. Jerm had the correct way it should look, and ice, just because someone commented a positive statement on a not so positive gun it doesn't mean you should flip a shit. Have you ever looked at any of your things? Get back to me once you decide to not be an idiot.
It think it looks like crap/is crap. But hey, if it works for you, then that"s all that should matter.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users