Items-
Disc Shot
Airtect 1000
old/fake credit card
clear tape
some type of string
Tools-
screw driver
hot glue
file
First
Disassemble both guns, then remove the tube, and plunger from the A.T.1000 and keep them (you can throw out everything else from the A.T.1000). Now remove all the internals from your Disk Shot except the trigger(and spring) and the catch(and spring).
<--Disc shot(Renegade's pic. sorry didn't have one of my own so i got it off Google.)
<-- Airtech(Google)
<-- catch
Second
cut a circle the size of the A.T.'s tube from the card and glue and tape on the large hole (with all the springs and plunger inside).<--like this
Third
File down the plunger org. plunger hole tell the A.T. 1000 plunger fits.<-- this hole
Forth
Hot glue your barrel on to the end of the tube(opp. of plunger rod)<-- like so
5th
Put the catch back in its org. place.
6th
Tie the string around the hole in the new plunger rod.<--not really clear
7th
Pull string through the cock lock, and make sure string is out of the back.
8th
Position barrel so it sticks out a little bit of the end of the gun. <-- like that
9th
Hot glue every thing in and screw back together<-- uncocked
<--cocked
Ranges (feet)
shot 1-23ft
shot 2-24ft
shot 3-25ft
shot 4-23ft
avg.-23.75ft
(all rounded to the nearest foot)
I think the low ranges are because of the barrel or my darts(my darts really suck).
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
I was right i just made my self some new Stefens (I believe that is spelled right), and a petg barrel (about 6inchs long) and it lokks like its hiting the mid 40's low 50's, I can't do a real range test yet becuase were i live we had winds gusting at 30 mph.
other mods.
Ok, so i started pumping this gun with steroids and i got a longer spring, a better cocking rail, and started to work on a clip system for the gun(not working so far). ill post the write up on here as soon as i get it to work.
Edited by nerfer9987, 03 January 2009 - 08:27 PM.