But anyways, its a beautiful gun.
I plugged the pump and did the bic pen mod. (Thanks to 123caviler for the help) Basic stuff.
I also of course sawed off the barrel and took the restrictors out.
So to make the new barrels more sturdy i took the rest of the Bic pen that i had and filled it all up with hot glue.
![Posted Image](http://i24.photobucket.com/albums/c8/P4R4NOI4_AG3NT/IMG_0483.jpg)
I glued it to the center of the turret to act as a means of stabilization for the barrels.
![Posted Image](http://i24.photobucket.com/albums/c8/P4R4NOI4_AG3NT/IMG_0484.jpg)
Goop'd the crayolas in place and let set over night.
Then i put hot glue in between them which dried quickly, holding them straight while the goop dried.
![Posted Image](http://i24.photobucket.com/albums/c8/P4R4NOI4_AG3NT/IMG_0485.jpg)
![Posted Image](http://i24.photobucket.com/albums/c8/P4R4NOI4_AG3NT/IMG_0486.jpg)
Wrapped them in E-tape once dry.
![Posted Image](http://i24.photobucket.com/albums/c8/P4R4NOI4_AG3NT/IMG_0487.jpg)
With new barrels:
![Posted Image](http://i24.photobucket.com/albums/c8/P4R4NOI4_AG3NT/IMG_0491.jpg)
Now, since i have fairly large hands its a big pain to pump this thing since the pump handle is so close to the turret. I fixed this by hot gluing the hell out of a piece of CPVC i had lying around to the bottom of the pump handle:
![Posted Image](http://i24.photobucket.com/albums/c8/P4R4NOI4_AG3NT/IMG_0492.jpg)
Then wrapped it up in E-tape for comfort and cosmetic reasons.
![Posted Image](http://i24.photobucket.com/albums/c8/P4R4NOI4_AG3NT/IMG_0494.jpg)
Ranges are lethal, 80-90 Ft with 4 good pumps.
I've always had this interest with burst shots in guns, primarily in multi-barreled ones. I was going to use a Sharpshooter II for carrying out this fantasy of having multiple burst shots waiting in a sidearm or secondary gun, but I think this AT2K does this much better.
Video of using burst shots:
Qs? Cs?