Jump to content


Photo

Airtech 2000 Stock Add On

how to easily put a sturdy stock on an At2k

9 replies to this topic

#1 Renegademilitia15

Renegademilitia15

    Member

  • Members
  • 516 posts
  • Location:Manchester, WA

Posted 04 May 2008 - 11:00 PM

Alrighty, I thought about this a while ago but couldn't get around to it until now 'cause of other mods.

Also as a side note, I saw other people trying to do this such as MattPaintballer's Crutch 2k mod but they all
seemed too flimsy for me.


So, without further ado


A stocked Airtech 2000

Supplies needed:

A crutch

Plumbers Goop

dremmel

E-tape

Hacksaw

Clamps

Ok, first take the crutch and measure the size you want for the stock. Next cut off an 8" section of the crutch for the stabilization part

Next cut a hole in the back of the Airtech so that the stock metal will fit in snugly. Be careful though not to stick in the drill too far because there is a vital tube right behind the hole you are drilling.
It should look like this.
Posted Image

Next stick the it in the hole you just drilled, and smother it in epoxy. Then take the 8" stabilizer and place it an angle and Plumbers goop both sides very thoroughly. You might want to take something and prop up the stock part to make it level with the blaster.
When its all done it should look like this.
Posted Image



So, leave it set for an hour or so and then, Presto! you have a stocked At2k. E-tape all around the connections to the gun and you're done. Here is the finished product.
Posted Image

Also, you may post some of your own stocked guns in this thread if you wish.

Questions? Comments? Flames?

Militia out-

Edited by Renegademilitia15, 16 September 2008 - 02:33 PM.

  • 0
Singled RFS
FA_24's response to Ice's back pain thread:
QUOTE

I used to have that problem until I got circumcised. 15 pounds later I was able to stand up straight.

#2 ChiliPepperFender

ChiliPepperFender

    Member

  • Members
  • 599 posts
  • Location:Redmond, WA

Posted 04 May 2008 - 11:05 PM

Can you still open up the gun or did you epoxy it shut? I like the idea of a crutch as a stock, but I don't think many people have crutch's laying around. Nice mod by the way.
  • 0
[The Blue Tiger][Manta Star]
WTS: Stock Crossbow. PM me if you have interest.

#3 Green-Buckshot

Green-Buckshot

    Member

  • Members
  • 221 posts
  • Location:New Jersizzle

Posted 04 May 2008 - 11:09 PM

Similar to the Crutch2k, only more compact... I like it.
Can you still open the gun?
  • 0
QUOTE(A side of nerf @ May 18 2008, 12:33 PM) View Post

Also, could you post some more revealing pictures?

#4 Renegademilitia15

Renegademilitia15

    Member

  • Members
  • 516 posts
  • Location:Manchester, WA

Posted 04 May 2008 - 11:15 PM

Thats a negative. You probably could you'd just have to rip off the epoxy and then when you're done just re-epoxy it, It didn't take too long to put it on.

ChilliPepperFender: I just went to goodwill and bought a single crutch. They had a bunch of 'em there I'm pretty sure its like that everywhere else. :P
  • 0
Singled RFS
FA_24's response to Ice's back pain thread:
QUOTE

I used to have that problem until I got circumcised. 15 pounds later I was able to stand up straight.

#5 hierarchy

hierarchy

    Member

  • Members
  • 336 posts
  • Location:Port Orchard, WA

Posted 04 May 2008 - 11:40 PM

Wow that turned out better than i thought. When you told me you were doing this to your AT2K I thought it would look terrible. But it actually turned out really nice.

The wouldn't even paint the end of the crutch because the yellow matches the accents of the gun.
  • 0
QUOTE(Retiate @ Aug 13 2007, 08:43 PM) View Post

I guess you have some heavy duty industrial strength toilet paper holders. Do they advise you to wear eye protection when changing rolls?

My TTG mod.

#6 Renegademilitia15

Renegademilitia15

    Member

  • Members
  • 516 posts
  • Location:Manchester, WA

Posted 04 May 2008 - 11:51 PM

And you thought it would look terrible....tsk tsk tsk <wags finger at you> :P

but an all black paint coat would look pretty sweet too...

Edited by Renegademilitia15, 05 September 2008 - 11:23 PM.

  • 0
Singled RFS
FA_24's response to Ice's back pain thread:
QUOTE

I used to have that problem until I got circumcised. 15 pounds later I was able to stand up straight.

#7 nerfboi

nerfboi

    Member

  • Members
  • 858 posts
  • Location:Rancho Santa Margarita, California

Posted 05 May 2008 - 12:15 AM

Looks pretty good. And looks more softer than mine:
Posted Image
I did the same thing as you. But I used PVC.
  • 0
We Ride together, we die together, Bad boys for life.

#8 Swords

Swords

    Member

  • Members
  • 110 posts
  • Location:San Jose, California

Posted 05 May 2008 - 06:57 PM

Nice job, although I do like a stock to be removable, especially in this case.
  • 0
SuperGeek.

#9 nerfboi

nerfboi

    Member

  • Members
  • 858 posts
  • Location:Rancho Santa Margarita, California

Posted 05 May 2008 - 10:56 PM

Yeah, mine comes off too. -_-
  • 0
We Ride together, we die together, Bad boys for life.

#10 Renegademilitia15

Renegademilitia15

    Member

  • Members
  • 516 posts
  • Location:Manchester, WA

Posted 10 May 2008 - 10:37 AM

I do like a stock to be removable, especially in this case.



Yeah, well with the stock being non-removable it makes it a little more sturdy, and I can't really think of a situation where I would need to remove it, its pretty compact and I don't really indoor war much.
  • 0
Singled RFS
FA_24's response to Ice's back pain thread:
QUOTE

I used to have that problem until I got circumcised. 15 pounds later I was able to stand up straight.


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users