Maverick Speedloader Mod
#1
Posted 09 April 2008 - 10:39 AM
I've been thinking about fast reload for the Maverick, I do know there is a clip mod which you can change the entire clip barrel, but you'll have to kill many Mavericks for it.
And I thought about the revolver speedloader device, which look like this.
It took me about 5 minutes to draw up something on the paper, then an hour to create a 3d model. It should be pretty easy to understand. Composed of PVC and spring and a lot of cuttings.
If you still don't know how it works, check out this video. Even if you understood you should still watch it, since I already made it.
Demo video on youtube
I designed it to only hold 5 darts, because even after I do the Russian Roulette Mod, the center still obstruct one hole. But you can make a 6 darts holder if you did the clip barrel mod. You don't need to sacrifice other Mavericks just so you can reload faster.
Easier said than done, I don't think making this speedloader will be an easy task, but if I have too much time I will attempt it.
Tell me what you think. I could use some tips before I commit more time and energy into this. (or if this has already been attempted, please let me know.)
#2
Posted 09 April 2008 - 10:58 AM
What I'm talking about is that the part that pushed the darts into the barrel. You should hake it longer of something. I'll show you, but can I have permission to use your pic?
#3
Posted 09 April 2008 - 11:07 AM
Man, you are on a roll. I like it. But wouldn't it be hard to push the darts in since there isn't anything to hold onto?
What I'm talking about is that the part that pushed the darts into the barrel. You should hake it longer of something. I'll show you, but can I have permission to use your pic?
By all means, use the pic. I kinda get your point, there should be a longer handler, right now you'll have to push the "fin" and it may not be very easy. Thanks for the tip!
#4
Posted 09 April 2008 - 11:17 AM
Look at the greyish lines. Thse should be a little wider. but Yeah, you get the point. Hopefully.
#5
Posted 09 April 2008 - 12:34 PM
I was tossing around ideas myself for a maverick speed loader. Well done. I was suprised to not find similar things all over the place. And again, awesome.
1 thing I would suggest is adding something to hold on to. From what I can see, there isn;t much to grasp on the speedloader.What I suggest is a design similar to holding a soup can in your hand with your index finger covering one end. The plunger that drives the darts/stefans into the barrels would be underneath your index finger. With a solid side, you can grip the thing with at least your middle and ring fingers and not get pinched by moving parts. The other advantage of some sort of enclosure would be that it could offer enough support to leave darts in the loader while carrying it in a pocket.
Good luck. If the final design works, I'd love to get a look at the design up close.
#7
Posted 09 April 2008 - 01:30 PM
Given, it doesn't take a whole lot of time, but one could argue that the purpose of a speedloader is, well, to load the gun in the most expedient fashion. It could also be argued that you don't really need to fully load it each time; just be aware that you have 5 shots, and a very fast loading mechanism. It could be viewed as a benefit over taking the extra time to use 2 speedloaders that load 3 darts each to have 6 shots. I think it's more or less a personal opinion which is better.
~ompa
#8
Posted 09 April 2008 - 03:58 PM
#9
Posted 09 April 2008 - 06:07 PM
Edited by Predalien_Ro, 09 April 2008 - 06:07 PM.
Try craft foam if you want to add cushioning to the handle.
#10
Posted 09 April 2008 - 06:35 PM
I made a speedloader for my 3K. I took a piece of wood a bit bigger thn the turret, and glues wood dowel around the piece of wood, lining up with the turret. So, you push the darts in the fron of your barrels, than use the speedloader to puah them the remainder of the way in, in one motion.
Sure it takes a tiny bit longer, but oh well. Props on hte idea, and big props if you make it.
-Chief
#11
Posted 09 April 2008 - 07:32 PM
Kevinericon, if you need any help or want to bounce ideas around, feel free to PM or AIM me. I'd love to have a speed-loader for my Maverick. In fact, I think that little gizmo could make the mav quite an attractive side arm.
#12
Posted 10 April 2008 - 12:11 AM
Don't want to shove balls in tight spaces. Trust me, bad idea.
For sale: Vintage WWII French rifles. Dropped once, never fired.
#13
Posted 10 April 2008 - 08:04 AM
I <3 serching. Something like this?
For a hornet, that design would have to 2-3 times as wide. Holdign a piece of 2x4 width-wise in your hand makes using the loader awkward and therefroe ineffective. But that's about the same basic principle for what I had in mind. Eh, whatever. I prefer magazine fed guns anyway. Now what we really need is a drum magazine for a LS. I'd gladly pay for one of those.
#14
Posted 10 April 2008 - 03:54 PM
Uses bullets where the shells have gunpowder in them so they can be ignited to propel the projectile fired.
The back of the turret is big enough so you can push the bullets into the barrel.
A Maverick:
Uses Nerf darts, which are much bigger than real bullets.
There aren't any holes behind the turret that are big enough for Nerf darts, therefore calling for a drill or dremel.
There is an air restrictor inside the back of the turret.
So in order to use a speedloader that functions like a real revolver's speedloader, we need to drill bigger holes at the back of the turret, take out the air restrictor and all of that orange part, and do the CPVC mod halfway without putting in the CPVC, but instead inserting CPVC shells with stefans/streamlines and taking out the CPVC. But taking out the CPVC might be a hassle, so this mod is best not attempted unless I'm wrong about some stuff or I'm missing some major algebra.
Edited by Tehmandude, 10 April 2008 - 03:55 PM.
If you accidentally clock somebody with a doubleshot, then you're more liable to break the doubleshot than you are to cause serious injury.
PM me if selling a NIB or LNNB LnL.
#15
Posted 10 April 2008 - 04:11 PM
#16
Posted 10 April 2008 - 04:12 PM
-Chief
#18
Posted 10 April 2008 - 09:48 PM
Tehmandude:
The speedloader is supposed to load the darts the same way you do, from the muzzle, just five times faster.
eddieoctane:
If you successfully mod your Maverick pls do post pictures! Loading all 6 darts would be better than just 5! You are talking about drilling a hole in the strut pointed by green arrow right? (which is the only reason my speedloader can only load 5 darts)
#19
Posted 10 April 2008 - 10:01 PM
But I will definitely post some pictures of what was done to get everything in place. Then you can actually put your speed loader into production.
#20
Posted 11 April 2008 - 12:02 AM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users