I'm considering spending <$200 on a scrollsaw, preferably <$150. What features or models should I be looking for? Any specific recommendations?

Scrollsaw Recommendations
Started by Thom, Jan 14 2008 12:20 AM
4 replies to this topic
#1
Posted 14 January 2008 - 12:20 AM
#2
Posted 14 January 2008 - 12:32 AM
http://www.dremel.co...G=66210&I=80473
I'm not sure how much it is though. Most likely over your budget. It's still a suggestion.
I'm not sure how much it is though. Most likely over your budget. It's still a suggestion.
kthxbaisend
#3
Posted 14 January 2008 - 08:26 AM
I bought a Ryobi one at my local Home Depot for $99 and I've been using it for 3 years now with no problems. THE most vital feature to look for is that the scroll saw accepts "pin end" blades instead of just "plain end" because the pin-end type are waaaaay easier to disconnect and reconnect when you need to feed the blade through a drilled pilot hole.
Check to see if your nearest Lowes has this model, then go to the store and make sure it can use "pin end" blades
http://www.lowes.com...2VHW&lpage=none
It looks like it should support them.
And you will also need some kind of table you can bolt the scroll saw to because they will walk away from you if you don't.
Check to see if your nearest Lowes has this model, then go to the store and make sure it can use "pin end" blades
http://www.lowes.com...2VHW&lpage=none
It looks like it should support them.
And you will also need some kind of table you can bolt the scroll saw to because they will walk away from you if you don't.
Edited by CaptainSlug, 14 January 2008 - 08:40 AM.
The little critters of nature, they don't know that they're ugly. That's very funny, a fly marrying a bumble bee. I told you I'd shoot, but you didn't believe me. Why didn't you believe me?
#4
Posted 14 January 2008 - 11:30 AM
Thanks. I was worried about that one because I'm suspicious of low-end power tools, but if it works for you, it'll certainly work for me. ^_^
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users