Scroll saws start around $100.thanks for the answers to my questions, i think my dad MIGHT have a jigsaw, handheld, and thats could help. how much could i buy one for, because my crossbow is beginning to die.
#51
Posted 27 April 2008 - 07:48 PM
#52
Posted 27 April 2008 - 08:33 PM
Zues Bottom of page
Trespassers will be used for scientific experiments
DAMN! I just lost the game...
#53
Posted 28 April 2008 - 12:23 AM
Sorry to be an ass, but following the CoC is a requisite to being a member here.
~ompa
#54
Posted 03 May 2008 - 05:34 PM
Anything that would normally be cut from polycarbonate, is instead machined from Aluminum. Special thanks to the West Chester Never Ending Research and Development Society for access to their band saw and mill, and of course to Captain Slug for his brilliant design.
Thanks for your time.
*Edit: Don't worry, I don't melee-strike with any part of a blaster I made at home, I find it helps cut down on the number of people cut on cpvc barrels, bruised, et cetera.
Edited by Twitch, 03 May 2008 - 06:04 PM.
~bpso86
~JediJoe9
#55
Posted 03 May 2008 - 06:00 PM
I'd rather shoot myself than be barrel tapped by that.
How smooth is the inside of the plunger tube? If it looks like the outside, it seems like it would file away the o-ring(s).
Nice job.
---
<death09>my girlfriend broke up with me and sent me pix of her and her new boyfriend in bed
<ktp753>ouch.
<death09>yeah.i sent them to her dad
#56
Posted 03 May 2008 - 06:10 PM
How heavy is it?
#57
Posted 03 May 2008 - 06:41 PM
Shouldn't be too bad. Aluminum and polycarbonate are similar in weight per cubic inch.How heavy is it?
#58
Posted 03 May 2008 - 07:04 PM
#59
Posted 04 May 2008 - 08:18 AM
Galaxy 613 - It only weighs about 4 pounds
doubleshot - yeah, the device isn't quite 100% complete, and at the moment I have not cut the foam to fit in the grip.
Thanks for your time.
~bpso86
~JediJoe9
#60
Posted 21 May 2008 - 09:49 PM
I'd like to know if this is even remotely possible before I try to make one. I'll accept that I can screw up and may need to make 2 or 3 grips before I get something that is comfortable and can hold up, but I don't want to waste time if there is too much stress in the grip for wood to work.
#61
Posted 09 June 2008 - 02:33 PM
On the subject of durability, I'm waiting for someone to make a titanium +bow! Kidding, of course, seeing as how that would cost several thousand dollars.
#62
Posted 01 July 2008 - 03:23 PM
Click Here
I find it works better in Firefox. If it asks for a password, just hit cancel and you should still be able to access the document. Any problems, please let me know.
Edited by Ryan201821, 13 August 2009 - 08:50 PM.
#63
Posted 01 July 2008 - 03:50 PM
#64
Posted 01 July 2008 - 03:54 PM
Edited by A side of nerf, 01 July 2008 - 03:55 PM.
#65
Posted 01 July 2008 - 04:06 PM
Did the link work for you? It works for me on multiple computers?Looks interesting, I finished my +bow today and I should have a picture by tomorrow. After seeing this, I am starting to think about designing integration brackets to. Could you expalin how it attaches to the splitfire and +bow, and could you get a picture when you finish it. Good idea Ryan.
Anyway, basically the two identical pieces screw into the top of the integration bracket perpendicularly. Then you take 2" screws and put them through both of the 13/64" holes which goes through the bottom of the +bow. Sorry that probably makes no sense. I'll ask sam to see if he'll post a picture about, because I made one for him. Either that or I'll just draw it up in CAD. The two barrels on the splitfire go through the integration bracket and zip ties secure the rest of the splitfire into place.
Did you try it in Firefox and IE?Not working for me... I downloaded the file and it still didn't work...
Edited by Ryan201821, 01 July 2008 - 04:10 PM.
#66
Posted 01 July 2008 - 04:08 PM
I only use firefox... I'm on a mac if that makes a difference....Did you try it in Firefox and IE?Not working for me... I downloaded the file and it still didn't work...
#67
Posted 01 July 2008 - 04:08 PM
I only use firefox... I'm on a mac if that makes a difference....Did you try it in Firefox and IE?Not working for me... I downloaded the file and it still didn't work...
That could be why. It only opens in Microsoft Word....maybe that's the problem.
Edited by Ryan201821, 01 July 2008 - 04:09 PM.
#68
Posted 01 July 2008 - 04:10 PM
Ill open it in word then. Macs have that program but I was trying preview (another program)...I only use firefox... I'm on a mac if that makes a difference....Did you try it in Firefox and IE?Not working for me... I downloaded the file and it still didn't work...
That could be why. It only opens in Microsoft Word....maybe that's the problem.
#69
Posted 01 July 2008 - 04:24 PM
Did the link work for you? It works for me on multiple computers?
Yes it worked for me, and I just checked it on my other computer. It worked on both and one has firefox and one has internet explorer so that doesn't make a difference. The reason you can't open it is because mac's will only open up the mac form of microsoft word, (I believe it is called mac word).
-A side of nerf
#70
Posted 01 July 2008 - 04:27 PM
No, you are wrong. Word on a mac is microsoft word. NOT mac word. I just found out I have not installed word on this laptop yet though so my viewing will have to hold off for about an hour.The reason you can't open it is because mac's will only open up the mac form of microsoft word, (I believe it is called mac word).
-A side of nerf
edit: I like the design... Once I get a +bow Ill be sure to add a splitfire to it... Or maybe a homemade one...
edit2: You posted that seconds after I downloaded word and looked at that... Weird...
Edited by Kid Flash, 01 July 2008 - 05:05 PM.
#71
Posted 01 July 2008 - 05:03 PM
Yeah, I see the Microsoft right above word now.No, you are wrong.
For those that are having trouble viewing this, here is a picture of what it looks like. However, do not print this, the measurements of the templates are not correct because I re sized the image to make it viewable. This is a good design, and I might consider buying my friend's splitfire to do it.
-A side of nerf
#72
Posted 05 July 2008 - 08:37 AM
You can even make template pages in this version of WORD
You can also make them in OpenOffice.
Excellent work Ryan.
Edited by CaptainSlug, 05 July 2008 - 08:39 AM.
#74
Posted 10 July 2008 - 04:30 PM
#75
Posted 10 July 2008 - 04:33 PM
When people use a +bow do you normally use mega or micro stefans, just so I know which I should use?
Micros. Nobody typically uses Megas anymore, for anything.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users