I found a way to fix, reinforce, and make it better!
Materials:
1x Broken 3k
1x 25-28 gauge aluminum sheeting (or some medium balsa wood)
1x Plumbers goop
1x Fat pliers
1x Rubber Band
1x Dremel w/ reinforced cutting wheels
1x Sharpie
First, open up your 3k. You don't need a pic for this.
Look for this piece. (its the broken one)
Use a sharpie to mark the aluminum to the size of the piece.
Then using the dremel, cut the aluminum.
Using Goop, apply it the the rotation mech and press the aluminum on for 10 secounds.
Then take the fat pliers, and put a rubberband around it to hold it.
I don't have a picture of it, but you should get the picture (no bad puns intended).
Let is dry somewhere safe for 2 days, then close it up, and shoot someone!
REMEMBER: Balsa can be substitued for this! Also, don't apply too much goop, just enough to cover and hold it.
If you need more pics, or help or anything, post or pm me.
Search words: at3k 3k airtech 3000 airtech 2000
Edited by keef, 24 October 2007 - 01:56 PM.
