4 replies to this topic

[Z-man12]

First off I know this has been done before. I just wanted to show people how to do it with pictures. It also seems to not be a common gun for modification. Here is how you make your Buzz Saw an automatic weapon.

-----------------------------------

First off open up the case. The trigger is the part we are going to focus on. When you depress it (see second picture for an idea what I mean) a tab at the top prevents more ammo from falling onto the spinning disk.



-----------------------------------

Mark what part of the trigger moves into the tube. Pull the trigger off and cut the marked section off. (Use what ever you think will make the cut best.)



-----------------------------------

Replace trigger in the gun.





-----------------------------------

If you did it right, when you pull the trigger ammo keeps falling into the gun and shooting out until you let go of the trigger.

Now you are hopper ready. (My next write up I am going to do with this gun, stay tuned.)

[Thom]

A neat and useful mod for a neglected gun.

[frost vectron]

This also works with the older and lesser-known Ripsaw.

[Z-man12]

frost vectron, on Aug 25 2007, 11:36 PM, said:

This also works with the older and lesser-known Ripsaw.

Yes it would. I was unable to find done with that model as well.

Just thought I would add that pound for pound this thing is one of the most psycologicaly intemidateing guns I own. It might not actualy soot that well. But the sound of primeing it up scares most of the people I have pointed it at silly. Course after I shoot them they laugh and are never scared again.

[Ubermensch]

Nice write-up. My brother has a buzzsaw-I'm totally gonna tell him about this. It can actually get very good ranges, and it's pretty dang intimidating.