Bolanga24's Content

#45344 Nerf Gun Remakes?

Posted by Bolanga24 on 02 January 2005 - 12:58 PM in General Nerf

Ok, I've been away from nerf for a while and before the break is over I wanted to get a few more guns. A very long time ago I heard that nerf was remaking powerclips to sell exclusively to kmart this fall. Does anyone know if this is true? I looked on google and a few other sites and wasn't able to find anything. Any help greatly appreciated.

#23269 Guns

Posted by Bolanga24 on 03 April 2004 - 01:47 AM in Off Topic

I go hunting with my dad every once in a while, and so far I've shot a 12 gauge shottie, 20 gauge, an M1 garand, and I have held my friend's dad's AK 47. By far, the M1 was the coolest. I saw an ad in some magazine that was selling them for $500, and that's what I'm gonna get when I turn 18.

#22868 Toyquest Xxl Rocket Launcher = Neo-ultimator

Posted by Bolanga24 on 29 March 2004 - 10:26 PM in General Nerf

It says on the box that it gets 60 feet, but I've noticed that mine tends to curve out at about 40-45 feet. I think the range on the box is pretty accurate.

#22845 Toyquest Xxl Rocket Launcher = Neo-ultimator

Posted by Bolanga24 on 29 March 2004 - 08:54 PM in General Nerf

Why would you want to mod it? It's a ROCKET LAUNCHER! It would take away the entire point of it if it shot darts.

#22111 Some Really Bad Luck With Supermaxxes

Posted by Bolanga24 on 22 March 2004 - 10:06 PM in General Nerf

No, there's no way that I overpumped it because I stuck to 3 pumps and hid it from my little bro.

#22100 Some Really Bad Luck With Supermaxxes

Posted by Bolanga24 on 22 March 2004 - 09:16 PM in General Nerf

Ok, I have bought 4 supermaxx guns, and they are all in the dumpster now except for the 750.

First, I got a 5000 because it looked awesome. When I finally got one, I opened it up only to find that there was a leak in the release pin, which I could not fix.

Then, I got an old 1500. I modified it, but only a week later the air tank literally split in half because it was so weak. I tried some plumbers goop, but it did not help.

Next, I got a new 3000 (yellow and blue) and the pump snapped off within the first 20 shots.

Finally, I got an old 750. Right out of the box, it had a leak. I couldn't believe it! I was seriously thinking about throwing it out my window. The leak is right below the air tank, so I might be able to fix it. Plumber's goop did not help, though. Do you guys think that if I melted it so there was not a hole, it would work?

Is it just my horribly bad luck, or are supermaxx guns really this unreliable?

#21133 Best At2k Mod For Stock Micros

Posted by Bolanga24 on 11 March 2004 - 07:30 PM in Modifications

alright thanks.

#21120 Best At2k Mod For Stock Micros

Posted by Bolanga24 on 11 March 2004 - 06:53 PM in Modifications

Ok, I have brass and pvc. What should I do, make 2 barrels with pvc that go further or use all 4 barrels with brass on my at2k?

#21014 Lanard Blast Bazooka

Posted by Bolanga24 on 10 March 2004 - 12:10 AM in General Nerf

When you plug the release, it always makes it shoot farther (at least from the guns I've used).

#20903 Lanard Blast Bazooka

Posted by Bolanga24 on 08 March 2004 - 12:17 AM in General Nerf

How many times do you pump yours?

#20665 At2k Using Sm1500 Turret?

Posted by Bolanga24 on 04 March 2004 - 02:20 PM in Modifications

I know, but I've heard that the at2k turret can't have 4 pvc barrels because it's too small.

#20648 At2k Using Sm1500 Turret?

Posted by Bolanga24 on 04 March 2004 - 01:25 AM in Modifications

Ok, I just won a AT2k and I have a spare sm1500 turret laying around (this is the 4-barrels). Does anybody know if I can use my sm1500 turret (it's already pvc'd) on the at2k?

#20097 Lanard Blast Bazooka

Posted by Bolanga24 on 27 February 2004 - 09:01 PM in General Nerf

Ok, I just got my BB today and at first it rocked, and it pumped up to 8 times. Then, after I used it a few times, the most it could pump w/o the overrelease valve thing kicking in was 5 pumps, and didnt go as far. Has this happened to anybody else?

#20085 Tek 10 ... Point Me In The Right Direction?

Posted by Bolanga24 on 27 February 2004 - 07:23 PM in Modifications

Thanks, I think I'm gonna brass it tonight. Also, I think I remember you saying that you got a good 60 ft. with the mod, is that right or not?

#19915 Tek 10 ... Point Me In The Right Direction?

Posted by Bolanga24 on 26 February 2004 - 12:28 AM in Modifications

I wanted to know how you did it, or if you could tell me where your post is if you already explained it there. Thanks alot.

#19822 Tek 10 ... Point Me In The Right Direction?

Posted by Bolanga24 on 25 February 2004 - 02:01 AM in Modifications

Ok, recently I read a post (I don't know who posted it) that talked about the tek ten and I remember someone saying that they had single barreled theirs, and now I can't find the post anywhere. Does anyone remember who posted this? Has anyone read this? It may have been on a different website, I'm not really sure.

#18545 Nite Finder Mods

Posted by Bolanga24 on 09 February 2004 - 02:29 AM in Modifications

Alright yea I think ill do that thanks

#18319 Wierd Target Shooter At Toysrus

Posted by Bolanga24 on 06 February 2004 - 02:25 AM in General Nerf

Have u tried modding it? If u do and it gets good range, I may try it.

#18204 Wierd Target Shooter At Toysrus

Posted by Bolanga24 on 05 February 2004 - 01:37 PM in General Nerf

Yeah they have that at my local toys r us too. It was really expensive though, like $40.

#18190 Nite Finder Mods

Posted by Bolanga24 on 05 February 2004 - 02:34 AM in Modifications

I just bought 6 nite finders for really cheap, and so far I've modded two of them. Both are brass modded. I saw the petg mod, but I dont have petg. I also saw the cpvc modded one. Which mod do you guys think is the best? Thanks

#17823 Removable Clips That Dont Fit Right Into Pc

Posted by Bolanga24 on 01 February 2004 - 02:33 AM in Modifications

Alright thats what I thought I should do but just double checking. Thanks

#17820 Removable Clips That Dont Fit Right Into Pc

Posted by Bolanga24 on 01 February 2004 - 01:50 AM in Modifications

I have modded my powerclip with 4 removable clips, and I notived that 2 of my clips dont stay in place when I fire. So, I fire a couple of shots, and in stead of staying in place, the clip goes all the way into the gun. So then when I take another shot I have to go through a couple of blanks in the clip to get to the darts I haven't fired yet. I hope this makes sense. Does anyone know how I can fix this? Thanks

#17741 Brass Barreling For Airjet Micros

Posted by Bolanga24 on 31 January 2004 - 06:54 PM in Modifications

Alright thanks alot. I got 21/32 and it fits nicely.

#17697 Brass Barreling For Airjet Micros

Posted by Bolanga24 on 31 January 2004 - 12:58 PM in Modifications

I usually use PVC, but I wanted to try brass. I was just wondering if anyone kn ew the size I should use.

#17670 Brass Barreling For Airjet Micros

Posted by Bolanga24 on 31 January 2004 - 02:35 AM in Modifications

Does anyone know what size of brass barrel a nerf airjet micro will fit into? Not just so that the black cap is sticking out, but so that the entire dart can fit down the barrel snugly. If anyone knows the size, please tell me.

#17404 Xxl Bazooka?

Posted by Bolanga24 on 28 January 2004 - 01:12 PM in General Nerf

My toys r us stopped stocking them a while back

#17364 Xxl Bazooka?

Posted by Bolanga24 on 27 January 2004 - 09:36 PM in General Nerf

Dude, I bought two of those rocket launchers you're talking about and they are the fricken sweetest things. If toys r us still stocked them, Id buy at least two more. The only problem with mine is that over time you have to pump it more. For example, for my older gun I have to pump about 25-30 times for the tank to be full. But my newest one only needs 14 pumps.

#17273 Help With Broken Sm1500

Posted by Bolanga24 on 27 January 2004 - 12:04 PM in General Nerf

Thanks for the quick replies guys. I haven't tried replacing the air tank in my sm1500. But, if the plumbers goop doesnt work I may try prelacing it with pvc or somethin.

#17202 Help With Broken Sm1500

Posted by Bolanga24 on 26 January 2004 - 07:36 PM in General Nerf

Ive got an old school sm1500 that's got an incredibly small hole in the orange air storage thing. Its so small that the only way I knew where the hole was was to put it under water, pump it, and see where the bubbles came from. THen, I covered it with epoxy, let it sit overnight, and the next day it still leaked air (after I pumped it twice). Does anyone have any suggestions? Any help would be greatly appreciated.