Yeah, I know about that Facebook Nerf group and I am a member too, but I can't make that "Dawn of Foam" war. I almost punched a Fuckin hole in my computer screen when I found out it's happening on April 2nd... my high school's Spring Break starts on March 30th and I'm going to be flying out of town that Friday to visit some Universities in the Big Apple. That's life, I suppose.
 
 
Nice man. Scratch 1 more player, Pineapplepies.
 
Andy, if you know anyone that like to Nerf PLEASE tell them about this Nerf war in Chicago.
We're having a really hellish time gathering players, this is the 2nd month and we only have like 4-5 people.
 
Thanks!
 

Heh heh seems like pacnick too has spring break, that's why I am leaving. Ok cool! So we have another, let us still try to advertise and see if we can get anywhere, paknick if you could try maybe saying a comment on the facebook page saying come to this war and get people to join that would be great. I think a good number of people we need at least is 6 people, then that on top of my friends which would add a fair amount of people. 
For the people who are joining, what sort of guns do you have, does anyone have some loaners or things others can use?

I'd be willing to come for a little bit, but mainly for the purpose of selling what I've got left... I of course will participate though. Im a bit south, in joliet

 
Anyways, ok, yeah actually I am interested in some of your stuff I would buy it there, in fact actually if you have $50 worth of blasters or the equivalent, I can just hand you a $50 visa gift card.

Edit:nevermind on whole double post thing, thank you ice nine

Yeah, I don't understand it at all. My original forum has been active for over a month already. There's 9.4 Million people living in the Chicagoland area and we get only 4 players? Let me say that again: 9.4 Million. That is an insane number of people. There should be way, way more people responding to this forum. I shouldn't have to look into other NerfHaven forums or venture into the world of Facebook just to invite players living 3-4 hours away. What about the 2.7 million residents of Chicago? Where the hell are all the Chicagoans? This is the largest city in America for Christ's Sake!!!!

Yeah you are right, it is crazy, I just don't understand how so few people are into this hobby it is great.

If you're having issues with outreach, you might have to branch out to Facebook (the Chicago Nerf Wars group is fairly active). They're hosting their Dawn of Foam war on April 2nd, that would probably be a good occasion for you to meet some other nerfers in your area and spread the word that you're willing to host wars.

Ok, well thanks for advice, pacnick this is your que, see if you can go to this, I know im going to be away but that being said I want to see if one of us could go and we could advertise.

We still have no response, we need people for this war, so anyone who sees this and would come out PLEASE say something.

Well... showing up is all that really matters, especially considering our circumstances with an incredibly low player count. As of right now, I honestly couldn't care less about what kind of blasters we're going to be using (mod or non-mod), the game-modes we decide to play, or the overall quality of the Nerf War. All I want is at least 15 or so players, a determined location, and a date/time for this nerf war. It's not that I'm being lazy or impatient, but considering the fact that I will probably be moving cross-country in about 3 & 1/2 months... there is a chance that I will have to throw in the towel and drop out of this thread if things don't speed up between now and summer. I really, really don't want this to happen so that's why I keep telling you guys to please help me out with the advertising, on here and on Facebook. We have 3 months to get it together. Time will fly, trust me.

Hmmmmm this isn't good, we are about 6 days away from 3 months until you leave, so here's the deal. I can get my friends in on this if everyone's fine on that, or we could have a small war with whoever we have. As for the others, please just advertise on Facebook, speaking of which Pacnick have you tried advertising to the group in Milwaukee? Look in the wars thread there is a lot of wars within an hour of us so I think I'm going to go advertise there.

 

Well, I know that I am advertising our Nerf War, not sure about others though. It would really help if I wasn't alone doing all this messaging. If you look through the forums, I've commented on just about every nerf group's forum within 4-5 hours of Chicago. Honestly, I've done as much as I can on here and on Facebook. If I do anymore messaging, I'm sure people will say that I am harassing them and I defiantly don't want that.

 

Keep in mind, it's been over 1 and 1/2 months since the initial posting. This war needs to happen before July, otherwise I won't be able to make it.  

I know, this is getting annoying, and I'm sorry I can't help but I have basically promised to myself that I don't need, and will not be joining social networks. 

However,

TO ANYONE OUT THERE THIS IS YOUR TIME TO RESPOND, AND TO ANYONE WHO ALREADY WANTS TO GO PLEASE ADVERTISE,

 

Here is the info;

This will take place preferably on the weekend of April 20th,

We will have almost no bans on darts or blasters(subject to change)

It will be hosted on a LARGE field in area code 60025, glenview, chicago, illinois, so homemades allowed

Anyone will be allowed, all ages,

I already have many darts including glue domes,

We will have many loaners so if you have nothing you can come

And other than that we will have fun so please come out

I have condor mag pouches, they are good for dart mags but if you try to put rival mags in them they fall out when you run. Which, unfortunately, is also the case for the paintball pod holding belt. The elastic bands that retain the pods just aren't set up right to hold rival mags since they're longer but thinner. It will be good for when I get a nemesis and have a use for paintball pods though.
 
I have a pouch that holds 8 rival magazines but not securely once you remove a few, I think I am stuck with that plus using the clips to attach a couple to the rails on my zeus. I might just sew something myself, or make a duct-tape/cardboard thing.

Well dangit. Yeah, I would do that, however. If you are willing to spend the money, I personally would just ask you try out the fast mag things, and quite frankly, if that works you could have dump pouches, AND then these fast mag things holding extra rounds you can just pull out and shoot the balls into the nemesis with the release all button.

I have tried them already, and I used them with a slightly modded Demolisher and they seem to hate flywheels and don't really feed them, but are very accurate in blasters like the Firestrike and non-flywheel clip fed blasters.
Edit:Seems like racer was right, they do work in flywheels. I tried the darts in my Stryfe and they worked, but not in the Demoliser though.

 

Do yo u have the link for the chunlin darts? They've been taken off of amazon.

http://www.amazon.co...rts bullet head

This should work, sorry for not shorting the link to one word but I couldn't find how to do it with the new interface. So if someone knows how to make a long url show up as a single word please tell me.

I am looking for a good way to carry 12 round rival magazine on a battle belt or plate carrier. I don't want to spend $15 on a 3d printed holder for 1-2 mags. I was using these:
 
https://www.amazon.c...ht holder&psc=1
 
Which are fine for carrying a few magazines, but I want to carry about a dozen and 12 flashlight holders would use my entire battle belt. What I'm hoping exists is something that will hold 5-6 magazine arranged vertically and only use up 2-3 molle loops. I own a variety of dump pouches/holsters/admin pouches etc and none of them are quite right (they're mostly not tall enough).
  R
What do you guys use to carry rival magazines? I'm open to pretty much any suggestions that will let me carry 10-12 magazines and cost less than $40 total. That can be one big pouch, two small ones, a thigh rig, whatever. I just need it to not take up a ton of real estate since I need to carry other gear as well.

https://www.wish.com...country_code=US

This is exactly what you need, fits your price range, and may be used, HOWEVER. I don't know if it works, all I'm suggesting is you check into these "fast mag" pistol carriers. I know the actual stick mag holsters can get really cheap, and depending on the dimensions of a regular rival magazine as compared to a regular nerf mag, you could potentially just use those. It's up to you, check into the dimensions of the pistol carriers, or go grab a 18 or 12 rounder and see if you could fit rival magazines in that profile.

I would be REALLY eager to know if it works, toadbrew, report back here if it works. Because if so, I think I single handily have found the best option for mag carriers, the 18 stack holders are cheap and good, and if this turns out, then we will have a rival option.

Edit:btw, these are molle compatible, and if anyone knows I WILL HIGHLIGHT THIS HERE BECAUSE I NEED AN IMPORTANT ANSWER. Do anyone know if these holders would work, it says it fits anything from a glock 45 ACP to a 1911

Edit 2:Did some even more research, toad you are lucky, rival 12 mags fit into the dimensions of a 12 mag when put sideways, so remember that discussion the other day about my stuff? Yeah, find cloth 5.56 or 7.62 mag holders, and find a molle vest(if you need I can link you one) and use all of that, I also have a link for a perfect holster that's $15, has storage for 6 of your rival magazines, and is MOLLE compatible on front and back side

Honestly, I am quickly growing to love these fast mag things, they are cheap, useful, can be inverted, and use MOLLE webbing, what more do you need. Now final thing is be warned, I just checked, the width of a rival magazine is too thick to fit into the profile of a regular mag, however that doesn't exactly translate into it not working. You just need to try it out.

Interesting. I ordered a paintball pod holder, if that doesn't work I might try those  next.

Well, i mean if you want more holders, use these, that chest rig i linked the other day is actually only $30 or so if you know where to look, and you can get an even cheaper rig if it's just a vest and not a full on rig.

https://www.amazon.c...uct_top?ie=UTF8

These are the holders you want that i know would work for 6 rival mags.

If you stack too many molle pouches on top of one another, they get very awkward very fast, and also since they're soft-sided they start to squish up and make it hard to pull stuff out of the back pouches. I'd really only want to two tiers (Ie pouch on a pouch on a vest/belt) for reliability purposes. But yes, those should hold nerf mags.

I mean I was assuming you would do something about that by making some form of stretching and support system out of wood, or rope, or springs. Something like that, i don't know I am just saying that chances are it would be possible to figure out how to fix that issue.

Any AK/7.62/FAL/M14/308 type mag pouches should hold any nerf mag. For instance, one single stack AK pouch holds one nerf mag, and a double stack pouch for AK mags hold 2 nerf mags. 
 
This holds 6 18s and lots of other pockets. lots of HVZers use this. 
http://www.amazon.co...g/dp/B005OIBYQM
 
http://www.ebay.com/...wKKrqVe5hXUfxWg
 
http://www.ebay.com/...LkAAOSwWnFV91vZ

I remember you recommending this, one question though. I did some more research and since you said that ak mag pouches work, would this one work? I know it's not a rig but personally I would rather get something I can keep adding onto than maximum amount of mags:https://www.amazon.c...molle mag pouch
And would this work for the 22rd worker, 20 buzz bee mag, and 18 round nerf?

Edit:hope this isn't too off topic from the main post but the main post has to do with mags of similar size so this may be a viable option on a molle rig. To my knowledge, you can keep adding mags so theoretically you could have 3 or 4 sets of the thing I listed on a rig and that would be about double the capacity of what you listed, albeit much more expensive but also more versatile and longer lasting, especially good if you are running a rapid strike/hyperfire

I think at the point you're trying to cobble together a goldberg-esque confabulation of molle mag pouches, duct tape, and 2x4's you should just get a nice messenger bag and call it a day.

What's the fun in having a messenger bag when as I said you could theoretically have mags going as far out as you can reach, yeah you would be weighed down but you would never run out of ammo. I would bet a long as you are athletic enough you could last the longest in any hvz if you have enough mags. In fact, I have thought of making a rifle that has two sets of workable flywheels in it as to allow you to fire out of the back magazine well to always have ammo to fire. And that coupled with a setup like this would allow you to last forever in anything not power based

I'm well aware of the various cut-down darts and their properties. Some have rock-hard tips, some aren't glued very well, some fly all over the place. For super stock and HvZ, they work fine however.
My point still stands. There is not a safe, hopperable, durable, and consistent dart from China. Accustrikes do not hopper consistently. 
I remain skeptical until I see a video of them going through a hopper with a standard barrel, shooting 200+ fps in a laser straight line. Also, fuck carrying cornstarch around.

Yeah I guess. And well then, I guess cornstarch is only for some people.

It's a good option for cheap ammo and ugly-color mags or 18-dart mags. They don't offer too much else that's of interest yet.

Yeah, but hey the mags and darts are good, that's all I care about

For the stuff I've looked at, shipping is not included in price. Add an extra $5 in there; though if they combine it might be an ok way to stock up.

Yes, ok, you are right, just checked and it's $31 including shipping for 1000, however, it's still a viable alternative because last I checked that's still cheaper than like eBay

Letting everyone know that we now have the best source for anything nerf.

Introducing,

Lighttake:http://www.lightake....e=0&pagesize=20

To give you an idea on how crazy this is, 1000 darts go for $18, and clear 18 mags go for $3 a pop, that's a third of all places previously available, and there have been multiple people saying it's not a scam.

They have darts of every color I have ever seen, anything from red, to purple, even on the mags

Plus, gone forever are the days of slugs, there are slug lookalikes for $1.99 per 50, this is just crazy, splurge while you can.

Good demolisher rewire tutorial: https://www.youtube....h?v=fsj_G2gGxoc
 
Never rewire while a battery is attached. Follow that rule, and cuttin g a wire will never result in things blowing up.
 
After a rewire, always test with normal AA batteries first. If they heat up or act weird, you have a short (which would be bad with the various lithium batteries). If everything seems good, then put in your NiMH'lithium/whatever batteries.
 
"protected" trustfires

Wait so should I not be using the trustfires, or was that just a result of overcharging which is something I am in fact aware of.

So some of you may or may not of seen the topic that I posted about my Demolisher not reving as a result of putting trustfires in with regular double A's, and in the end I am forced to buy new batteries. I am wondering, for anyone who uses double A replacement batteries, what would you recommend:Trustfire or ultrafire or IMR? Along with that, does it matter if they are protected? And finally, what charger would you recommend for your favored battery?

Is this a normal unmodded demolisher, or doesn't have just basic mods (lock removal, etc)?
Mixing batteryou brands and types is never good, mixing trustfire and generic AA could have damaged your motors.
So the question is, does it still rev if you use just generic AA batteries?

Yeah, I know it is not good to mix batteries, I already had a topic about that. Also, Yes, it does still work just fine.

It's a good option for cheap ammo and ugly-color mags or 18-dart mags. They don't offer too much else that's of interest 

yeah, but still they are good mags, i have some, they are really good, and work fine in any blaster. Still, it's cheap

No matter what, a full rewire (or even full internal upgrade including microswitches and a lipo connector) will be complimentary or even required.

Ok, but the only problem is that I don't know where to get the wire for rewiring my Demolisher. I also have not attempted anything like that so if you can tell me where I can find a tutorial on how to rewire and remove locks like the thermoresister that would be great since I don't want to end up blowing my self up when I severe the wrong wire.

IMRs are good. If used with stock motors use no more than two. Use "dummy batteries" like these, not more AA batteries to fill the other spots.
 
NIMH  rechargeables like Eneloops are also good. With stock motors you can use four.
 
 
Trustfires and Ultrafires are horrible and may explode on you and/or burn your house down.

Well why do you think I got the protected ones? Along with that, could you link a charger for the IMR's if there is any?

I'll be ordering a few magazines to see if this site is legit, the prices are pretty nice. The colors are not new however. 
I've yet to see a durable, consistent, safe, and hopperable dart comparable to the slug with minimal wye modifications. I'm not seeing anything that fits the bill there.

A.)already done, Walcom was offered free stuff in the nerf department, usually, that means not a scam at all

B.)wrong, there are cut down ACCs, weird slug lookalikes, elites, worker, and you can manually cut accustrike darts and more. Here's the link, options, my friend, select the kind you want

http://www.lightake....tml?sku=2231060

C) even if slugs are better, these are cheaper, and like silly darts will feed with corn starch, these may be the same way. It may be possible, and it's very likely that any of the above mentioned kinds could work, albeit maybe a fix or two, and as I said, they have look alike slugs, if slugs work, these will, and are cheaper. Plus, if you are able to cut down accustrike darts, which I believe hopper, you can get 1000 for $18 as opposed to usually $20 plus endless amounts of time to make 200 slugs

Edit:oh and foam blast also seems to have gotten stuff

Protip: Don't go into the free shipping section, it's full of dildos

haha yeah xD we need a banner on here that says "beware of b.o.n.a.r.s" which stands for big, orange, nerf arrows and rockets, specifically

 

 

Welcome to the internet

it's scary place #shudders#

Thanks for the advice. I'm looking into transitioning to using a Stryfe, but I will probably remove the skirt to see if that fixes the problem. I question whether it will, because I understand that skirt helps center the dart before going through the flywheels and I imagine the spinning out is due to some darts existing the flywheels off center (just a theory).

 

Also, I never have jamming issues (although I'm just running 6 NiMH cells).

I didn't know that the skirt did that, since it didn't do anything wrong to my freind's Demolisher when I took off the skirt because would not stop jamming.

Anyone use 3rd generation Koosh darts in a Rapidstrike? I noticed every 6 or so shot out of the my Rapidstrike tend to twirl, spin out, or helicopter.

 

Anyone else observe this and if so, do you know what the cause is and how to fix it? I wonder if removing the skirt might help?

There is a way to remove the skirt, and although it may not help, I would still do this anyway since removing the skirt lowers the chance jamming by a lot. What you need to do is open up the jam door without a clip in(make sure there is no way the flywheels can activate) and stick you finger in the part where the darts enter into the flywheels. Then bend your finger down and around and then yank it out. If it does not work try getting at it in a different way or use really long needle nose pliers

If you think that may be it, then I have ordered dummy batteries and the problem may be solved. If anyone has any idea if the trust fires with regular batteries may be it, then tell me please.

So I have those protected trust fires from Amazon, and have been running them in my Demolisher with regular aa battery's. So I am in a war and my I try to rev up the gun and but instead of working it starts to increase in sound then weakens in power untill it stops(how it sounds:vvvrrrroooooMMMMMvvvvvvv) Does anyone know what is wrong, I need it soon for another war so please respond as soon as possible.

Yes, I am, and before anyone says anything it should be fine to do this, since I have used it a lot and nothing has happened.

The mengun types are good but the ekind waffleheads have more forward weight, so they fly better under high flywheel power conditions. Both have more forward weight & will be much more stable in flight than elites but with less overall range (not that you'd notice with elites with their wild flight paths which reduce their straight linear range).

Oh ok, so would these be better for flywheels or springers or can they be used well across the board? And I don't care about range that much, I want to know the difference between the two but I just need something better than elites

Their tip diameter and profile is different and in that regard specifically I GREATLY prefer the men-gun darts for homeamdes because they feed easier through hoppers and breech systems once they are cut shorter. The quality control of EKIND darts is also somewhat spotty so you'll have to spot check batches for mold flash on the tips.
 
If you are using stock blasters there's no practical difference between the two beyond weight distribution.

Ok thank you, if you have either, and same goes for sir brass, do either of you know the preformance difference and the accuracy difference? Like basically the reason why I asked this in the first place is because I'm wondering for this large war I am hosting if I should pick one over the other to buy or if I should buy both.

So as you can possibly tell from the title, wondering if anyone knows the difference/performance difference between men gun darts and the Ekind waffle tips. I am in the market for bulk amounts of darts and both men gun and the ekind darts are in the sizes I want them, so if anyone could tell me which one is better if at all that would be great.
This is at full length by the way, however if anyone knows the hopperabilty of either of these then please share because may use these for homemades too.

I won't repeat what others have said about mixing chemistries, but I am going to ask:

 

Is the demolisher stock?  You may be tripping the PPTC (thermistor) in the blaster if you didn't remove it.

It is completely stock, nothing done to it except the batteries have been changed. It also has only 2 trustfires, and 2 alkalines, since the PPTC was tripping with three trustfires and one dummy.

Have you tried running the gun with regular batteries since then its possible you burned out the motors its a problem that eventually occurs when you overvolt them.

Yes I have, it is not broken, it seems some of the batteries are.

Could you hook this up with a system, and or could you possibly code this to regulate the flywheel speeds and then furthermore control the thing with dials, that would make this FDL-2 but open source AND in a much smaller and versatile package which would be groundbreaking.

The fdl2 has dials for Firesign mode:semi, burst, full auto. And rof control. This cannot be done with the mechanicly pushed stryfe.
Whoops on the dart counter meaker. I thought that would have more attention as one of the coolest things.

  
That's not what I mean, I meant that it would be similar to the FDL-2, and as opposed to having electronically powered pusher, I mean this system or make a dial that can manipulate the voltage going to the motors, and modify the speeds, and potentially have something that can be control the fps.

Yeah the work involved to make it a 'counter' was kind of trivial so I din't highlight that feature, but yeah that should be given more emphasis given it's the most important part of it. Also, I called it a 'round counter' in my post, not an 'ammo counter'. Rounds/ammo... same difference... though "round" seems like the more appropriate word. When I hear the word 'rounds', I'm thinking darts in a clip... when I hear the word 'ammo', I'm thinking darts in a scavengers bucket. IDK, LOL!!!
 
Pineapplepies, that's the first I've heard of 'FDL-2'... I'll have to look in to that. As far as controlling flywheel and feeder motors, I think both features would stay within range of the 328p. The select fire feeder motor thing would require probably 4 GPIOs (2 switches on a dial => bits for 4 modes, a feeder position switch, and motor driver output), and some simple logic fed from the remaining rounds variable. The flywheel could be controlled with a logic level FET (I'm a big fan of those) and analogWrite() I believe, since that uses Timer0 and the IR sensor is rigged to Timer1. Not 100% sure, but one problem I forsee with using Timer0 analogWrite(), is it may introduce some error in the RPM measurements (which gets micros() from Timer0). I think the errors would be negligible though, and if they weren't then maybe analogWrite() can be ported to use Timer2 for this project (I've ported a servo lib to another timer on an unrelated mega based project... wasn't that hard to do). With 3 analog inputs left, adding a 'flywheel speed dial' to that would be trivial.
 
Now my mind digs deeper down the rabbit hole... how about developing a PID loop to set actual FPS with the dial... that would be tight!!! We could get the flywheels smart... make them adjust up/down depending on what FPS is coming out the other end.
 
Anyhow, my time to work on code can be hit/miss depending on my work/family schedule. This is open source code, and I'm no expert coder. There are many things that could be done more clearly/efficiently, on top of adding desired features. I haven't shared on Nerf reddit... I figure one place is better than 2, and Nerf Haven seemed the best spot for this. That said, I might put this on github if there are other dudes wanting to work on it.
 
At the moment, it compiles around 84% progmem with the useless splashscreen, and 69% without the splashscreen. That leaves plenty of 'hard drive' to add features. SRAM is at 82% with or without the splashscreen, but so far the heap hasn't crashed on me. Before I was using float arrays, 90% SRAM, and that was crashing. So, when we start talking about adding more to the data tables (like current, etc...), or expanding the max clip size, we may run in to the limit of the 328p. That said, I've got some extra esp8266's. I think the code for that would be even simpler, since the ide has built in esp stuff that does better than 65nsec (so no need for input capture, and direct port probably won't be necessary). That would make for a much more compatible and easier to read code, but I enjoy squeezing blood from rocks.
 
Kevin

Yes, that's what I meant, I mean find a way to allow this to control or post how you can control the speeds of the motors. Some people may not think it's useful, but when you get into the area of FDL-2 performance you may not want to give some nasty welts so you can turn down the speed. My other idea with that was that if you are in a really long battle you can limit the voltage going to the motors, so if you only get one 2s pack you don't burn through your battery too fast. And yes, that's exactly what I meant, finding a way to control fps.

I have been looking around for the best way to mod a nerf dart but are not sure which is the best.What way do you mod your darts?Or what is the best 3rd party darts to buy?

ACCurate darts are great, but I would just get bulleyes/precut or cutdown ACCs otherwise known as artifact darts. That would be for springers, for all around I would get the waffle darts, and for flywheels you will want Koosh darts. If you want slug type darts SCS work too, in link above, and the full length ones are accurate and my second choice for springers.

As for modding darts, putting straws in them, and cutting off the tip in elites and streamlines and making a glue dome are good ways to mod the darts to make them more accurate.

since you have to use unprotected ones or the circuit won't even start.

Actually I would like to chime in and agree trustfires and ultrafires aren't the best for this aplication but I will have oppose you on saying protected trustfires and ultrafires will not work since I have been able to make them work for a stryfe, hail fire, and demolisher although I will say the will eventually not work after a certain amount of use but that DOES NOT mean they won't run in flywheel blaster

I'm surprised it's that slow, I was going to get the 8 kg spring, but now you have me wondering. Maybe 80-90 is the fastest anything can so with the AR intact? Don't get me wrong, that's about what I was looking for anyway, it just seems lower than I would have guessed.

No, but it depends how far you want to go, I have modded one long shot before and actually I would reccomend just buying and using a [k25] because it has more potential, plus you get five LONG springs for 12.15 plus shipping. The only problem is the fact that it is slightly hard to prime, I would recommend getting a pumpgrip if you wanted to go a step further and get a [k26] to work, but the max and strongest spring the longshot can handle is a [k25].

Does anyone know of how to make an absolver for the demolisher hamp? I don't really know what I would use and suggestions and material list would help. There aren't really any good guides on this and I know I would want a coupler but not sure how to make the multi barrel system.

To clarify, what I'm asking here is I understand I need a coupler system, and I need a bunch of a certain size of other couplers to make different attachments, but I'm wondering what I would use and how I would do it

You could use CPVC in a 3 shot or 7 shot configuration (assuming the 7 shot configuration fits; the 3 shot definitely would).

 
Ok.... but still, how?!?!? I know that's how I do it, but where do I start, better question, what do I go and buy to make it???!? I know I should use either a twist fit or a regular coupler but then what about the actual piece that holds the cpvc, like what holds those pieces in place. I don't know if any pvc part that would fit in the back of that launching tube, like what size coupler or piece what I use

 

Been done, no offence intended, but wasn't this on an SBNC show? Where some dude did what your asking about? Cuz if thats what your thinking about, I think he explained how he made it.
But seriously, just cut out the inline barrel thingy, put some CPVC inside, and puddy that shiz up
I mean, I honestly would just couple it with CPVC and use it as a built on HAMP system.
 
-Montymarks

Checked, I know which video you are talking about but no he mentioned conduit, not what we could use here in the U.S, and I mean I want it to be REMOVABLE and able to fire one dart or three. I will ask the question and clarify more here, I want a REMOVABLE system where I put one coupler piece, and then can select different types of barrels so I can use megas, three darts, one dart, missles etc. What I don't get though is how do I make said attachments, and what materials do I use? Like what size coupling would actually allow me to use three darts and then also one?

And also, I don't care what I have to buy/use to do this, including if I have to print something because I have a 3D printer, I can make next to anything but need to know how