I dedicate this to Value Village
cheyner's Content
There have been 215 items by cheyner (Search limited from 21-January 97)
#286272 Modification and Paintjob Pictures
Posted by
on 29 September 2010 - 09:29 PM
in
Modifications
I dedicate this to Value Village
#287205 Modification and Paintjob Pictures
Posted by
on 19 October 2010 - 11:36 PM
in
Modifications
As if I have to follow that amazing work.
First tape and spray job.
Pictures dont do the orange justice, not that you can tell, it's flourescent.
White base, flourescent orange, hammered silver, and black, plus gloss clear coat.
First tape and spray job.
Pictures dont do the orange justice, not that you can tell, it's flourescent.
White base, flourescent orange, hammered silver, and black, plus gloss clear coat.
#263434 Modification and Paintjob Pictures
Posted by
on 27 January 2010 - 06:25 PM
in
Modifications
Sharpshooter II with drilled out 1/2 cpvc barrels and 2 replacement springs. No ranges but the bottom barrel has some kick to it. Top barrel, not so much.
P.S. What's with the giant fucking photo's?
P.S. What's with the giant fucking photo's?
#284297 Modification and Paintjob Pictures
Posted by
on 29 August 2010 - 09:23 PM
in
Modifications
AT4K!!!
Rear Loading!!
Will be getting paint and other body work eventually.
Rear Loading!!
Will be getting paint and other body work eventually.
#283715 Modification and Paintjob Pictures
Posted by
on 21 August 2010 - 11:01 PM
in
Modifications
Ninja Turtle NF.
Best rail accessory ever.
Flower Power, my ladys 4B.
Best rail accessory ever.
Flower Power, my ladys 4B.
#283936 Modification and Paintjob Pictures
Posted by
on 24 August 2010 - 10:39 PM
in
Modifications
Finished Sharvil06's SM1500.
10" Pteg barrels.
Rear-loading.
Craft foam for the turret seal.
Brass for the dart slide.
Plugged pump.
Glued trigger spring.
10" Pteg barrels.
Rear-loading.
Craft foam for the turret seal.
Brass for the dart slide.
Plugged pump.
Glued trigger spring.
#287571 Modification and Paintjob Pictures
Posted by
on 26 October 2010 - 11:28 PM
in
Modifications
Served me very well at HbH4.
Whats that in the turret?
A hint of the future colour of this beast.
#288384 Modification and Paintjob Pictures
Posted by
on 14 November 2010 - 11:43 AM
in
Modifications
DoomCheyner is finished.
I originally wanted to lightly dust the barrels, I quickly got carried away.
Shiny Dollarama silver.
I originally wanted to lightly dust the barrels, I quickly got carried away.
Shiny Dollarama silver.
#296358 Modification and Paintjob Pictures
Posted by
on 21 March 2011 - 05:02 PM
in
Modifications
Arrowstorm.
Pearson PTEG is a perfect tight fit in the stock barrels. All I have to do is remove the "just-in-case" e-tape and give a yank to be able to fire arrows.
Going to mess around with different springs for this, when I can finally bring myself to stop playing with it.
Pearson PTEG is a perfect tight fit in the stock barrels. All I have to do is remove the "just-in-case" e-tape and give a yank to be able to fire arrows.
Going to mess around with different springs for this, when I can finally bring myself to stop playing with it.
#306256 Modification and Paintjob Pictures
Posted by
on 20 October 2011 - 08:33 PM
in
Modifications
Just finished my wife, Bookworm's Doomsayer, tentatively named "The Librarian".
His and Hers:
BAM! See you fuckers at Hell (those of you lucky enough that is).
His and Hers:
BAM! See you fuckers at Hell (those of you lucky enough that is).
#296126 Modification and Paintjob Pictures
Posted by
on 16 March 2011 - 06:08 PM
in
Modifications
Greed of the Canadian Nerf scene contrated out my services last year. After many delays (a obliterated tank) I have finally finished his SM3K.
Super easy rear loading:
Super easy rear loading:
#294420 Modification and Paintjob Pictures
Posted by
on 12 February 2011 - 05:39 PM
in
Modifications
Omni Consumer Products! Robocop ftw.
Barricade
Trigger activated switch
E-taped flywheels
All random locks removed
9v/AA optional, as in, both work.
Looks badass without pointless "barrel"
Loud as hell
Going to be clip modded soon.
Barricade
Trigger activated switch
E-taped flywheels
All random locks removed
9v/AA optional, as in, both work.
Looks badass without pointless "barrel"
Loud as hell
Going to be clip modded soon.
#292591 Modification and Paintjob Pictures
Posted by
on 10 January 2011 - 11:24 PM
in
Modifications
Joined the 2k club.
Standard stuff done.
Iron Man SS
Everything done should be pretty obvious.
PAS
Warthog
17/32 Brass barrels.
Standard stuff done.
Iron Man SS
Everything done should be pretty obvious.
PAS
Warthog
17/32 Brass barrels.
#294279 Modification and Paintjob Pictures
Posted by
on 09 February 2011 - 04:37 PM
in
Modifications
Shell cuts are from the previous owner.
It's almost too heavy just with the couplers on for the rotation to work right.
And even when it did work right, 5 foot ranges, glad I tested it before making all those barrels and clips.
I'm going to revisit this at a later date, I just dont have the time or patience for it anymore.
MODDING TIP: Dont even bother trying to assemble one of these the same way you took it apart. Put all the internals in the opposite side of the shell, then close and flip over to put the screws in.
It will save you so much time and effort, you will not belive it.
#281737 Modification and Paintjob Pictures
Posted by
on 31 July 2010 - 10:49 PM
in
Modifications
That is amazing work Baghead, I really need to start painting.
At least this has some nice faded character to it. I found it at a garbage dump in perfect working order.
I give you Second Chance, my rescued SuperMaxx 1500
Butchered rear loading slot:
Craft foam for the turret seal.
Plugged pump.
Cleaned so many times I lost count.
At least this has some nice faded character to it. I found it at a garbage dump in perfect working order.
I give you Second Chance, my rescued SuperMaxx 1500
Butchered rear loading slot:
Craft foam for the turret seal.
Plugged pump.
Cleaned so many times I lost count.
#286183 Modification and Paintjob Pictures
Posted by
on 27 September 2010 - 11:13 PM
in
Modifications
Fraternal Twins:
Well, technically one is a Airzone Tri-shot or whatever its called, but I pulled the sticker off, and now its a Lanard Shot Gun. Has Lanard molded into the plastic and everything.
Turreted version has standard things done to it.
-Full travel on the plunger rod
-Glued rotation mech
-Rear loading
-3/4 PVC in the rear loading holes
-Screen door spring + half of a Stink Blaster spring
-Craft foam on the plunger head. I used the spring rest as a template for the foam, not realizing at the time it would flare the plunger head PERFECTLY, 99.9% seal.
-Reinforced everything, plunger rests, priming bar, catch, and turret roation bar.
Hoppered version is my original turreted one. It broke, twice, so I decided to hack the shit out of it.
-Front cut off to just before the plunger rests
-Plunger tube flipped so the air outlet is at the top.
-Reinforced shell, plunger tube, plunger tube rests, catch, and priming bar.
-2 full tubes of E-putty used to reinforce everything.
-Stock and sections of screen door and Stink Blaster springs.
-Full travel on the plunger rod
-Full draw, hits the 8th notch.
-Screws cut off in the front have been replaced with bolts.
-Front heavy as hell.
-Homemade wye.
Needs cosmetic work on the front, bad.
Well, technically one is a Airzone Tri-shot or whatever its called, but I pulled the sticker off, and now its a Lanard Shot Gun. Has Lanard molded into the plastic and everything.
Turreted version has standard things done to it.
-Full travel on the plunger rod
-Glued rotation mech
-Rear loading
-3/4 PVC in the rear loading holes
-Screen door spring + half of a Stink Blaster spring
-Craft foam on the plunger head. I used the spring rest as a template for the foam, not realizing at the time it would flare the plunger head PERFECTLY, 99.9% seal.
-Reinforced everything, plunger rests, priming bar, catch, and turret roation bar.
Hoppered version is my original turreted one. It broke, twice, so I decided to hack the shit out of it.
-Front cut off to just before the plunger rests
-Plunger tube flipped so the air outlet is at the top.
-Reinforced shell, plunger tube, plunger tube rests, catch, and priming bar.
-2 full tubes of E-putty used to reinforce everything.
-Stock and sections of screen door and Stink Blaster springs.
-Full travel on the plunger rod
-Full draw, hits the 8th notch.
-Screws cut off in the front have been replaced with bolts.
-Front heavy as hell.
-Homemade wye.
Needs cosmetic work on the front, bad.
#281434 Modification and Paintjob Pictures
Posted by
on 27 July 2010 - 11:03 PM
in
Modifications
Finished my Lanard Shotgun.
Craft foam use #132: Gun rest.
Rear loading slot and barrel spacer.
10 inch Petg barrels
Rear loading slots streamlined with 1/2" PVC
Actually using the stock
Barrel spacer made from a random sheet of plastic found at work.
2 layers of craft foam with some lube for the seal.
Extra nub on plunger cut off and filled with craft foam.
BBB + stock spring.
Improved plunger stroke.
Craft foam use #132: Gun rest.
Rear loading slot and barrel spacer.
10 inch Petg barrels
Rear loading slots streamlined with 1/2" PVC
Actually using the stock
Barrel spacer made from a random sheet of plastic found at work.
2 layers of craft foam with some lube for the seal.
Extra nub on plunger cut off and filled with craft foam.
BBB + stock spring.
Improved plunger stroke.
#273574 Modification and Paintjob Pictures
Posted by
on 27 April 2010 - 10:08 PM
in
Modifications
Tetra-Strike
Only the one barrel is crooked, coincedentaly that tank leaks anyway.
No ranges as its snowing (what the fuck) and im not going out in that shit.
Only the one barrel is crooked, coincedentaly that tank leaks anyway.
No ranges as its snowing (what the fuck) and im not going out in that shit.
#267496 Modification and Paintjob Pictures
Posted by
on 01 March 2010 - 05:46 PM
in
Modifications
The 65-B, 6 barrel buzz bee big blast.
Turret, not shotgun.
Rear loading and write-up tonight.
Turret, not shotgun.
Rear loading and write-up tonight.
#270154 Modification and Paintjob Pictures
Posted by
on 23 March 2010 - 11:04 PM
in
Modifications
Pistol Splat with a internal cpvc coupler.
Who needs a workbench when you have McDonald and Taco Bell trays.
Edit: And by Pistol Splat I of course mean Wipeout.
Who needs a workbench when you have McDonald and Taco Bell trays.
Edit: And by Pistol Splat I of course mean Wipeout.
#276478 Modification and Paintjob Pictures
Posted by
on 31 May 2010 - 08:41 AM
in
Modifications
Finished my SuperMaxx 3000.
-9 inch PETG barrels
-still auto-rotate's (better once the seal wears in a bit)
-craft foam seal
-plugged pump
-barrel spacer made from orange pex
-rear-loading
Shoulder stock and ranges to come.
-9 inch PETG barrels
-still auto-rotate's (better once the seal wears in a bit)
-craft foam seal
-plugged pump
-barrel spacer made from orange pex
-rear-loading
Shoulder stock and ranges to come.
#277107 Homemades Picture Thread
Posted by
on 07 June 2010 - 08:31 PM
in
Homemades
As fun as HAMP's are, they are a pain in the ass to transport, and mobility becomes an issue if you are not in a wide open space. I have an answer to this:
I call it the Mini Mega HAMP.
Only 2 feet long (back to barrel tip).
Shoot's 2-3 dart at a time.
20 shot hopper clip (it's as long as the HAMP).
Petg nested in red Pex.
Plunger tube is 3" PVC.
Homemade wye.
I call it the Mini Mega HAMP.
Only 2 feet long (back to barrel tip).
Shoot's 2-3 dart at a time.
20 shot hopper clip (it's as long as the HAMP).
Petg nested in red Pex.
Plunger tube is 3" PVC.
Homemade wye.
#276537 Homemades Picture Thread
Posted by
on 31 May 2010 - 09:24 PM
in
Homemades
What? No HAMP's yet?
5 minute $2 HAMP
Found at a dollar store (Dollarama for you Canadians), it is basically a foam covered plunger that was originally intended for water.
Has a plate on the front that lets you select from 1 jet of water, or 4 streams.
All you have to do is glue a coupler on the front and plug the 4 small hole's in the process.
No need to open, just glue on a coupler and you are done.
Not really a homemade, but it has the spirit of one, that, and it is bright green.
5 minute $2 HAMP
Found at a dollar store (Dollarama for you Canadians), it is basically a foam covered plunger that was originally intended for water.
Has a plate on the front that lets you select from 1 jet of water, or 4 streams.
All you have to do is glue a coupler on the front and plug the 4 small hole's in the process.
No need to open, just glue on a coupler and you are done.
Not really a homemade, but it has the spirit of one, that, and it is bright green.
#275013 Homemades Picture Thread
Posted by
on 16 May 2010 - 11:28 PM
in
Homemades
MEGAHAMP
"Naked"
Triple seal with wooden spacers on the plunger.
Homemade wye, as they are pretty much impossible to find in the great white north.
Notes:
Shit load of hot glue used (around 40 sticks), she's sturdy.
The seal is almost too good, you either need to be pretty strong, or fairly tall (leverage) to use this one.
Also, a tip for anybody thinking of making a MEGAHAMP, make sure it fits in your car before you finish it, this one was close.
Dollarama tape is better than Home Hardware's.
"Naked"
Triple seal with wooden spacers on the plunger.
Homemade wye, as they are pretty much impossible to find in the great white north.
Notes:
Shit load of hot glue used (around 40 sticks), she's sturdy.
The seal is almost too good, you either need to be pretty strong, or fairly tall (leverage) to use this one.
Also, a tip for anybody thinking of making a MEGAHAMP, make sure it fits in your car before you finish it, this one was close.
Dollarama tape is better than Home Hardware's.
#273181 Homemades Picture Thread
Posted by
on 24 April 2010 - 04:11 PM
in
Homemades
DA MAMP (Dual Action Medium Airflow Manual Plunger)
Push the handle to fire a shot, then pull it back to fire another.
Uses 2 10 shot RSCB's that vaccume load.
Built to prove that the design works, fires in the 50 ft range.
Push the handle to fire a shot, then pull it back to fire another.
Uses 2 10 shot RSCB's that vaccume load.
Built to prove that the design works, fires in the 50 ft range.
#303126 Nerf Modifications Directory
Posted by
on 09 August 2011 - 07:23 PM
in
Modifications
I tried doing the right thing, PMing Blue my question, but his inbox is either full or disabled, so I have to ask this here. Why is everything from Supermaxx 3k to Titan missing from the directory?
#320806 Nerf Modifications Directory
Posted by
on 21 August 2012 - 08:56 PM
in
Modifications
------------------------------------------------------------------------
------------------------------------------------------------------------
>>>>> Vortex Praxis
------------------------------------------------------------------------
::Basic Spring Relocation
::Max Spring Relocation
::Extended Capacity Clips
------------------------------------------------------------------------
Unless you count these three I guess you are right.
#307961 Where To Buy Modding Materials
Posted by
on 01 December 2011 - 06:45 PM
in
Modifications
Alternatively, most stick lumber comes in tarps, a few questions towards the right people should get you all the tarp you need, for free.
Any store that sells lumber should be able to help you with this, no problem.
Depending on what you need the thin-wall PVC for, the tube used for central vac piping is 1 1/2 O.D. and fits over 1 1/4 PVC with a bit of a gap. It isn't the strongest though, so I don't know how well it will like mechanical fasteners.
Edit: I double checked today, I lied, it is not 1 1/2 O.D, it is 2" O.D..
Any store that sells lumber should be able to help you with this, no problem.
Depending on what you need the thin-wall PVC for, the tube used for central vac piping is 1 1/2 O.D. and fits over 1 1/4 PVC with a bit of a gap. It isn't the strongest though, so I don't know how well it will like mechanical fasteners.
Edit: I double checked today, I lied, it is not 1 1/2 O.D, it is 2" O.D..
#275965 Diy: Hopper Clips
Posted by
on 25 May 2010 - 07:14 PM
in
Darts and Barrels
If you make your own wye, you could play with the angle to get streamlines to work, say a 35 degree angle. Also, on my MegaHAMP, I found that I NEEDED a dart stop, no way around it, otherwise on the pull I was sucking darts backwards.
#276009 N-strike Barrel Break Ix-2
Posted by
on 25 May 2010 - 11:10 PM
in
News
Looks up you can break open the thing.. Look at the screws in the pictures....
Oh, you mean like a Barrel Break IX-2? That would be crazy.
It looks like it might even have 2 plungers in it, which would be interesting to see, reverse or not.
#266600 Deploy Cs-6 Overhaul
Posted by
on 23 February 2010 - 05:13 PM
in
Modifications
You should add a little speaker thats plays a certain awesome sound bite when it deploys, or "transforms" if you will.
#295527 Dartsmithing Tips Archive
Posted by
on 07 March 2011 - 08:05 PM
in
Darts and Barrels
I still think they are a little thin, at least by the look. What thickness of foam are these? Say... 1/16"? I think that I would probably use at least 1/8", probably 3/16" if I could. Really good idea with the leather/gasket punch.
The great part about craft foam is that it is so cheap. It is still a much cheaper option if you double up 2 sheets if you dont think 1 is thick enough.
My local Dollarama has similar sized packs of craft foam for $2. They have self adhesive as well, but I am not sure of the size/cost.
I might actually try making some slugs now, seeing as I cannot find felt tips locally.
#274141 The Overkill: This Is What Happens When A Titan And A Longshot Have Ch
Posted by
on 05 May 2010 - 09:41 PM
in
Modifications
Isnt this the guy that taught Forsaken_Angel24 everything he knows?
And those are the re-sized pics?
And those are the re-sized pics?
#269052 Doubled Recon With Twin Drums
Posted by
on 13 March 2010 - 07:27 PM
in
Modifications
The double Recon is a nice peice of work. That Raider though, holy shit, that is redicously clean.
#315615 2012 Nerf War Schedule
Posted by
on 12 May 2012 - 09:32 PM
in
Nerf Wars
Month of Event: June
[url=http://nerfhaven.com/forums/index.php?showtopic=22573&pid=315613&st=0&#entry315613]23rd [Ont] K.I.N.G.[/url]
#327834 2013 New Releases Mod Contest
Posted by
on 09 March 2013 - 02:56 PM
in
News
Excuse the stupid question, but for the factor of release dates, are there any regional considerations? For example, the Stockade has been released overseas pre-2013, but has yet to be officially released in the US.
Considering the number of modders across the Pacific in particular, I thought some clarification might be helpful.
Not just overseas, we have had them in Canada since at least Christmas.
#310322 Wrist Mounted Flywheel Gauntlet Blaster
Posted by
on 29 January 2012 - 08:21 PM
in
Homemades
Bringing the Quick 16 to mind, you should maybe move away from having it be a drum shape. Make it more of a gradual spiral shape to accommodate the large head on taggers. You could also make your clip larger this way as it would be spiraling up your arm, limiting clip size to what you are comfortable having strapped to your forearm, you could go pretty much all the way to your elbow.
#310085 Wrist Mounted Flywheel Gauntlet Blaster
Posted by
on 25 January 2012 - 04:14 PM
in
Homemades
The tube magazine could work, use a end cap with a hole drilled into it so you can attach some vinyl tubing. Then simply run it up your arm and to a clip on the neck of your shirt, simply blow to load another dart.
#304529 Nerf Vortex Praxis Spring relocation
Posted by
on 09 September 2011 - 11:23 PM
in
Modifications
I did this last night to both a Praxis and Vigilon, and I am quite impressed.
I suggest buying the refill packs with your blasters though, the disks can be hard to keep track of when they start ricocheting.
I suggest buying the refill packs with your blasters though, the disks can be hard to keep track of when they start ricocheting.
#318245 N-Strike vs Vortex
Posted by
on 09 July 2012 - 05:52 PM
in
General Nerf
It definitely requires some brain calibration. The flight path of the discs varies widely depending on how you tilt your blaster, and are especially prone to curving mid-flight. I suppose you could use that to your benefit after a lot of practice, but for now it seems like only a hindrance compared to the reliable trajectory that darts follow.
I find that is actually one of the stronger benefits of using Vortex blasters. Nobody knows where the disc is going, where with most non-streamline darts they follow a mainly linear trajectory, making them easier to dodge. I have started carrying my Praxis with a 20 disc mag on a sling, along with my primary. I find it fairly effective to spam a few disc's at somebody and pick them off with my primary while they are dodging the disc's.
