- NerfHaven
- → Banshee's Content
Banshee's Content
There have been 572 items by Banshee (Search limited from 12-February 97)
#208601 How
Posted by
Banshee
on 01 February 2009 - 12:47 PM
in
Modifications
#198349 Brass?
Posted by
Banshee
on 23 December 2008 - 04:04 PM
in
Modifications
#125241 Help With At 3000
Posted by
Banshee
on 06 October 2007 - 05:50 PM
in
Modifications
#161407 Sm 1500 Pump Replacement Problem
Posted by
Banshee
on 03 July 2008 - 06:56 PM
in
Modifications
But I know what your problem is. In most pumps for guns there is a rubber gasket at the end that lets air in to the tank but not out. You don't have the gasket in the new pump so you can't hold the pressure in. What i would've done is take an old pump with the hose still on it, cut most of the pipe off the original pump. Then you wrap e-tape around the stump of pipe until it fits the opening of you new pump. Then take a piece of PVC of your desired size and stick it over the e-tape. (Make sure its very tight). Then blow into the open end to make sure its sealed perfectly. Then create a new pump handle with a new O-ring, make sure its a perfect fit. I use this on my RF20, Magstrike, and a few of my super soaker's. SO MUCH NICER to only have to pump 10 times to shoot 20 darts!
Hope that helped!
-Banshee
#162430 Ls Help Plz?
Posted by
Banshee
on 11 July 2008 - 05:54 PM
in
Modifications
#164002 Airtech 2k Question
Posted by
Banshee
on 23 July 2008 - 10:06 PM
in
Modifications
#163999 Airtech 2k Question
Posted by
Banshee
on 23 July 2008 - 09:45 PM
in
Modifications
#208532 Increasing Magstrike Trigger Stroke?
Posted by
Banshee
on 01 February 2009 - 02:22 AM
in
Modifications
#206492 Big Salvo Problems
Posted by
Banshee
on 25 January 2009 - 11:40 PM
in
Modifications
Yeah I think so, I've heard that the OP valve on it kicks in at around 15 pumps, mine does at 22 pumps.Without a plugged pump? It seems a little unlikely to me, but who knows? Maybe you have an exceptionally powerful one.I'll try it. Thanks, I'm pretty sure you're talking about Q-tips right? Haha. I don't know much about Big Salvo's But I didn't even open it up, I just stuck 10" CPVC barrels down each existing barrel with some e-tape on each and I'm getting about 110'-120' ranges level. Is it supposed to be that awesome?
#206365 Big Salvo Problems
Posted by
Banshee
on 25 January 2009 - 06:01 PM
in
Modifications
#206343 Big Salvo Problems
Posted by
Banshee
on 25 January 2009 - 05:08 PM
in
Modifications
#313835 Supermaxx 500 Leak
Posted by
Banshee
on 01 April 2012 - 03:23 PM
in
Modifications
Once I could get to the seal, I used a little oil on it, that didn't do anything. So then I put a little lithium grease on it. That helped a tiny bit, but it still wont hold pressure. Its not an instant leak, I'd say it takes about a second to leak out 2 pumps. When I push the firing pin into the tank and pump it, it makes no difference, so I don't think a stronger spring would fix it. It seems that higher pressure seems to help seal it, so plugging the pump might work, but not only is the pump glued in and I can't get it out, but I hear that plugging the pump on a SM500 can blow the tank, so I really don't know what to do. I would like to be able to soften the glue on the tank and open it up. I don't want to cut it because I've never been able to successfully glue tanks back together, and since this tank is attached to the pump as one big piece, I'm not even going to try.
I've done everything I know how to do to fix this thing, and I haven't gotten very far. Does anyone have any ideas on what I could do?
#160790 Nf Help
Posted by
Banshee
on 28 June 2008 - 07:20 PM
in
Modifications
#184946 Demon Breech( Titan Mod) Update!
Posted by
Banshee
on 22 October 2008 - 04:57 PM
in
Modifications
Being a noob isn't an excuse to try and suck dicks. My advice to all noobs, spend at LEAST 3 months on this site before posting. You'll learn how its run. I had been on here for years before ever becoming a member, and I've never been yelled at. So fix up your shit. Read the CoC and here's what you did wrong with you last post:Ok, and now you've STOLEN one of my pictures without asking for permission.
WAY TO GO.
You also didn't need a second post, you EDIT your first one.
AND this isn't a breech.
Please do not steal pictures without asking permission first.
Im srry about ur pic i totaly forgot. like i said im a noob i cant post well
"Im srry about ur pic i totaly forgot. like i said im a noob i cant post well"
Try it like this...
"I'm sorry about your picture, I totally forgot. Like I said, I'm a noob, I can't post well. Here's 20 dollars for trying to suck your dick."
#257214 Spings And O Rings
Posted by
Banshee
on 25 November 2009 - 12:23 AM
in
Modifications
#191293 At2k Help
Posted by
Banshee
on 22 November 2008 - 07:12 PM
in
Modifications
#228186 Longshot Troubles
Posted by
Banshee
on 04 May 2009 - 08:55 PM
in
Modifications
#204631 Yes Another Switch Shot Mod
Posted by
Banshee
on 19 January 2009 - 12:51 AM
in
Modifications
#182464 Having Mod Problems
Posted by
Banshee
on 08 October 2008 - 07:25 PM
in
Modifications
#162624 Another Recon Problem
Posted by
Banshee
on 13 July 2008 - 12:15 PM
in
Modifications
#163133 Nf Help
Posted by
Banshee
on 17 July 2008 - 07:29 PM
in
Modifications
#160449 Ds Help
Posted by
Banshee
on 25 June 2008 - 10:25 PM
in
Modifications
I'm hoping that someone can tell me how to put it back together and fix my problem, or better yet show me some pictures of the inside correctly put together. (With multiple angles because there is 2 layers to the internals.) Anything helps!
Thanks guys!
#160467 Ds Help
Posted by
Banshee
on 26 June 2008 - 12:17 AM
in
Modifications
I enjoy good humor. Hahaha. but I got it at good will so I was like eh, what the heck. I also got a SM3000 (lucky find) but the DS sucks balls. Oh well. I'll use it as a back scratcher.Ok. This happened to me a while ago and now I truly appreciate the numerous warnings that the DS sucked major balls. My Doubleshot was also not shooting anything. By some miracle of God I somehow put it back together and fit everything back in. And I still had the same problem. Throw it away, give to some 5 year old who thinks its a cool gun, but a rubber plunger on the front and use it to unclog toilets, etc. and then go buy a titan and triple shot it. It gets better ranges and it shoots three shots instead of two.
#160565 Ds Help
Posted by
Banshee
on 26 June 2008 - 09:50 PM
in
Modifications
![:D](http://nerfhaven.com/forums/public/style_emoticons/default/biggrin.gif)
Jwasko, if you can get me pics that'd be great!
#203232 At3k - Removable Rose Turret
Posted by
Banshee
on 13 January 2009 - 11:42 PM
in
Modifications
#159709 Longshot Troubles
Posted by
Banshee
on 19 June 2008 - 10:43 AM
in
Modifications
#163134 Non-advancing Magstrike Mag
Posted by
Banshee
on 17 July 2008 - 07:34 PM
in
Modifications
#158605 No Cpvc
Posted by
Banshee
on 09 June 2008 - 08:35 PM
in
Modifications
#195790 Range Shot
Posted by
Banshee
on 13 December 2008 - 01:30 AM
in
Modifications
#258641 Specific Nightfinder Question
Posted by
Banshee
on 11 December 2009 - 04:58 PM
in
Modifications
#241571 At2k Issue
Posted by
Banshee
on 12 July 2009 - 03:03 AM
in
Modifications
Straighten out a paper clip, pull the firing pin all the way back, stick the paper clip into the tank and in the center of the o-ring, pull the o-ring to the center of the release hole in the tank, carefully remove the paper clip and slowly release the firing pin into the o-ring and it will pop right back on. It literally takes less than 5 minutes if you don't get get it the first time. NEVER cut the tank open, especially if you're an inexperienced modder. You're never get it back together perfectly. It'll leak or blow after a few uses.
#165210 Big Bad Easy!
Posted by
Banshee
on 29 July 2008 - 04:40 PM
in
Modifications
#163236 Best Air Tank In A Gun?
Posted by
Banshee
on 18 July 2008 - 03:00 PM
in
Modifications
Well then, I would have to agree with everyone else when we say AT2K tanks. They're cheap, easy to find, and the guns themselves are small. Not to mention its very easy to integrate the guns in other places.Yeah SM3k tanks suck. I have had 3 have the exact same problem as you. I would go with a 2k tank, or an at3k tank, as I like those too. If you really want to be classy, a SM1.5k would work really well too.
I'm glad to see that this isn't unusual, that popping noice scared the crap out of me haha.
Banchee: well ROF is not that important for my purposes, the more power i can get the better, however I have a size limit since this thing will be roughly fitting in a maverick shell, a titan tank would be too big. I have a 18inch barrel on this thing, and before the sm3k tank blew i was getting 120ft flat, so I would like a tank that would keep my ranges around that or, of course, more
#163137 Best Air Tank In A Gun?
Posted by
Banshee
on 17 July 2008 - 07:48 PM
in
Modifications
#190336 Nerf Maverick Help
Posted by
Banshee
on 17 November 2008 - 07:55 PM
in
Modifications
http://nerfhaven.com...?showtopic=8367
If its not, you shouldn't be nerfing...
#159462 What Gun Has Potential.
Posted by
Banshee
on 17 June 2008 - 12:51 AM
in
General Nerf
#158602 Longshot Problem
Posted by
Banshee
on 09 June 2008 - 08:33 PM
in
Modifications
#241390 Industrial Velcro
Posted by
Banshee
on 11 July 2009 - 12:05 AM
in
Modifications
#179467 Nite-finder Comes Apart.
Posted by
Banshee
on 24 September 2008 - 11:49 PM
in
Modifications
#237568 Hornet Madness
Posted by
Banshee
on 20 June 2009 - 01:26 AM
in
Modifications
Submerging is a good idea, but its not always a good idea to put the pump itself underwater because then you start pumping water through the lines and into the tanks and it makes a mess and you'll get water vapor every time you fire. It looks kinda cool, but it soaks everything. Just a tip.Unless you are a pretty good modder, I wouldn't even bother fixing it. The hornet is pretty hard gun to mod, even fir experienced modders. The end result won't even be worth it. You bought it at a garage sale, so it probably wasn't more than $5. If I were you I would scrap it. It has tons of parts.
If you really want to fix it, I would submerge the internals in water and pump it and see if bubbles come. If so, then goop up the spot.
- NerfHaven
- → Banshee's Content
- Terms of Service and Privacy Policy
- Code of Conduct ·