Jump to content


Photo

Nf Help


7 replies to this topic

#1 Killim-spree

Killim-spree

    Member

  • Members
  • 35 posts
  • Location:Calgary, Alberta (Canada)

Posted 17 July 2008 - 06:13 PM

Alright, My nite finder has some issues. I gave it a spring and barrel replacement and a air removal, it only shoots 20 feet with stephans or just spins out of control (these are stephans I purchased from mod man). Stock darts go about 30. There is a couple things that could have caused this problem, I made the plunger caps hole bigger and stuck the barrel in a little bit as I didn't have any epoxy then. Another thing could be because I opened the gun atleast 7 times which is most likely why the plunger is having a hard time coming together. The last is the peice between the plunger cap and plunger is cracked.

If I can't fix this I'll just buy another NF and mod it the right way as I have recently bought some epoxy.
  • 0

#2 raw shrimp

raw shrimp

    Member

  • Members
  • 160 posts
  • Location:Irvine, California

Posted 17 July 2008 - 06:17 PM

How long is your barrel? It might be too short.
  • 0

#3 Philote

Philote

    Member

  • Members
  • 220 posts
  • Location:Shakespeare Colony

Posted 17 July 2008 - 06:18 PM

It sounds like you answered your own question there...
Talking to Killim, to avoid confusion.

Edited by Philote, 17 July 2008 - 06:19 PM.

  • 0
EPH!
QUOTE
What do I wnat for my birthday? The usual, money, a Xbox Game, and a throng of bearded men. You know, the usual stuff.


#4 Killim-spree

Killim-spree

    Member

  • Members
  • 35 posts
  • Location:Calgary, Alberta (Canada)

Posted 17 July 2008 - 06:38 PM

How long is your barrel? It might be too short.

It's about four inches.

Philote-I still don't know which problem it is though.

Edited by Killim-spree, 17 July 2008 - 06:39 PM.

  • 0

#5 Silencer

Silencer

    Member

  • Members
  • 443 posts
  • Location:Boulder
  • State:Colorado
  • Country:United States

Posted 17 July 2008 - 06:40 PM

It sounds like you answered your own question there...
Talking to Killim, to avoid confusion.


I think he was wondering which problem was causing the crappy ranges.
  • 0
TMC

#6 Dr Moose

Dr Moose

    Member

  • Members
  • 149 posts
  • Location:New York

Posted 17 July 2008 - 07:10 PM

So is the barrel glued in with anything? You should glue it with epoxy or plumbers goop, because if it isn't airtight the air is probably escaping around the barrel instead of going to the dart and giving it maximum range.
  • 0
QUOTE(Forsaken_angel24 @ Apr 29 2008, 01:24 AM) View Post

QUOTE(Kid Flash @ Apr 27 2008, 06:11 PM) View Post

What is the best way to go at removing a stump without any power tools? Thanks ahead of time!

Be a man! Use your hands!

#7 Banshee

Banshee

    Member

  • Members
  • 668 posts
  • Location:Chandler, Arizona

Posted 17 July 2008 - 07:29 PM

If the barrel isn't glued in, then you may have disconnected the barrel from the plunger so you're hardly getting any air. If not, then I'd say the combination of problems equals the fact that your NF is fucked. Buy a new one.
  • 0
Like my page on Facebook! PM me, I do commissions!

#8 Killim-spree

Killim-spree

    Member

  • Members
  • 35 posts
  • Location:Calgary, Alberta (Canada)

Posted 17 July 2008 - 07:54 PM

If the barrel isn't glued in, then you may have disconnected the barrel from the plunger so you're hardly getting any air. If not, then I'd say the combination of problems equals the fact that your NF is fucked. Buy a new one.

Ya I tried glueing it in this morning and it didn't work, I think I'll just buy it again.
  • 0


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users