Here it is unprimed.
And here it is angled and primed.
It even has realistic sights!
The internals are very simple here is the catch and trigger.[img]http://http://i333.photobucket.com/albums/m384/swadja__2008/2008_1212angleshot0002.jpg[/img]
Next I replaced the plastic washer to hold the spring in the plunger tube with a metal metric (M10) I found at Ace, to add reinforcement. I also stretched the stock spring.
Next I cut a 2.5" piece of cpvc and put a coupler on it and wrapped the coupler in e-tape.
Then to make a better seal around the hollow post I put an old stock dart in the cpvc (without the top).
Then I super glued the coupler at the front of the stock barrel.
Here it is finished.
I don't have official ranges yet because it is dark out I will post them tomorrow.
Sorry about the pic size.
Edited by tatertotguy, 12 December 2008 - 08:36 PM.