- NerfHaven
- → GeneralPrimevil's Content
GeneralPrimevil's Content
There have been 568 items by GeneralPrimevil (Search limited from 06-May 97)
#25871 New Valve?
Posted by GeneralPrimevil on 11 May 2004 - 04:12 PM in Homemades
I'm not new to nerf (5 years practice), but I've only made two homemades. This valve may work for several designs that require a faster opening valve than a ball valve, but not as many small parts as a Zero valve, although I haven't really heard much about those. it just seems as if the Zero valve, according to the instructions on this website, has too small of an airway in it. I already have a use for it in a bolt-action rifle that requires a larger diameter (less restricted) air flow. The design for the valve seems simple. I just came up with it at school and was wondering what you guys thought of it, cause most of you have made several homemades yourselves. Sorry for the crappyness (word?) of the photo, but i had to scan it on low resolution. The little rod thing (green), when pulled, opens up the valve by moving a tube (yellow) that crosses between the in/outlets (light blue). This could be made out of most any material, I think.
P.S.-Don't care about the writing in the photo. It's illegible on the real drawing too. javascript:emoticon('')
#25940 New Valve?
Posted by GeneralPrimevil on 12 May 2004 - 03:57 PM in Homemades
Vintage, to answer your last post, no, you're not the only one that doesn't get it, I don't get the design for that air regulator either.
#25977 New Valve?
Posted by GeneralPrimevil on 12 May 2004 - 08:13 PM in Homemades
#25992 Time
Posted by GeneralPrimevil on 12 May 2004 - 09:02 PM in Off Topic
If my "beliefs" on time travel are true though, then teleportation would be how to travel in time. I think that there is this exact same galaxy/solar system/planet/thingy somewhere else in the universe, maybe hundreds of them, but at different time stages. For instance, there could be one with this esarth only 3 million years in the past. Or future for that matter. And if we could teleport, then we could go to that different timed planet. But since we can't get back, we'd need one large cell phone coverage plan in order to relay our findings. That's just what I think, I also think someone covered this earlier in this thread. This whole post is kinda stupid on my part, but oh well. Great thread though! Very interesting.
#26101 Lefty? Righty? Switch?
Posted by GeneralPrimevil on 13 May 2004 - 06:04 PM in General Nerf
#26159 Conscious Of My Nitefinder
Posted by GeneralPrimevil on 14 May 2004 - 05:44 AM in Modifications
#26184 Conscious Of My Nitefinder
Posted by GeneralPrimevil on 14 May 2004 - 03:55 PM in Modifications
#26188 Homemade Ball Valve Gun
Posted by GeneralPrimevil on 14 May 2004 - 04:21 PM in Homemades
#26520 Homemade Internals For Sm1500
Posted by GeneralPrimevil on 19 May 2004 - 08:06 AM in Homemades
1.) Completely homemade with CO2. I posted a valve on this site before. Using a small verson of that valve (2.25 inch total length) and some braided steel cable tubes, along with a new barrel/valve coupler, as in, the thing that connects the valve to the barrel turret, in order to alow higher pressure CO2. The CO2 adapter will be the one found on the site linked below. I would also have to re-engineer the trigger out of 1/4 inch steel plate in order to allow the new valve.
2.) Same as above, but instead of a CO2 adapter and stuff, the pump and tube from a Blastfire because the original pump (and valve) have no threads for tubes.
3.) Just throwing it all away, and selling the case. I would use the turrets on my NF then.
Number three seems to be the easiest solution.
<Links>
CO2 adapter:
http://shortyusa.com...x.html?RID=3923
Don't worry about the DEagle in the picture, it doesn't come with it
valve:
http://nerfhaven.com...?showtopic=2144
Flames welcome for my stupidity, or for requesting to be yelled at. I just really see no purpose for this either. It just gives me something to do for the summer.
Advice is welcome. Be it with this project or for future posts on this websites forum.
#26533 1500 Spupermax
Posted by GeneralPrimevil on 19 May 2004 - 12:44 PM in General Nerf
With the other topic on this thread, I don't have to angle any of my guns that I've modified. They all have the barrels tilted upward at least 10 degrees. My NF is the worst at 25 degrees. Not on purpose, but it's just what happened when I jammed the crayola barrel in it. So yeah, I now have to angle my gun downward in order to hit anything within 40' of me with my NF.
#26535 Homemade Internals For Sm1500
Posted by GeneralPrimevil on 19 May 2004 - 01:30 PM in Homemades
Hmm...super soaker? I have an old XP55 and XXP175 that need something to do. I'm kinda interested in your project because one of them has two barrels and can be modified to use rubber bladders instead of tanks to hold pressure, once i get around to it. The other is useless without a pump, so iuf your idea uses something besides a pump, then i would definetly like to know if your idea uses CO2, compressed air, etc., and how it works out.
<EDIT> Is it just me, or does the pull valve in an XP55 look very similar to the oones used in SM? It may just be that they're both pull valves and that's why<EDIT>
#26571 Homemade Internals For Sm1500
Posted by GeneralPrimevil on 19 May 2004 - 05:54 PM in Homemades
file:///C:/Documents%20and%20Settings/Administrator/My%20Documents/My%20Pictures/nerf%20009.jpg
In case you can't tell from the picture, which you probably can't from the angle at which it was taken, it uses a SM1500 pump. The picture may not work, if so, then just say so and I'll try it again. Sorry for the typos in the last post. I was tired. That's also why the picture is a bit blurry.
#26688 Nerf Grenades
Posted by GeneralPrimevil on 21 May 2004 - 07:30 PM in Homemades
One last thing, alkaselzer (sp) does not provide very much force when put in water and shaken up in a film case. I know this from first hand experience in the fifth grade. Even when the kid used three selzers and a full thing of water, and all other posibilities of combinations, he was not able to get a very large amount of force rapidly. The best working version took two minutes to blow. It really blew though. I'm sorry that I don't remember the amounts of the water/seltzers that he used. Just take this post as my two cents, and then sum.
#26696 Water Bottle Stock
Posted by GeneralPrimevil on 21 May 2004 - 08:45 PM in Modifications
#26774 Just Bought An Rf20
Posted by GeneralPrimevil on 23 May 2004 - 10:25 AM in General Nerf
#26855 Code Of Conduct
Posted by GeneralPrimevil on 24 May 2004 - 04:16 AM in Site Feedback
#26914 Rajghjg
Posted by GeneralPrimevil on 24 May 2004 - 07:08 PM in Modifications
To reply your problem, did you cut out enough plastic to get the barrel assembly removed? Pics may help, if possible.
#26917 Just A Thought...
Posted by GeneralPrimevil on 24 May 2004 - 07:15 PM in Homemades
#26928 Rajghjg
Posted by GeneralPrimevil on 24 May 2004 - 08:01 PM in Modifications
#26939 Nerf Hurts
Posted by GeneralPrimevil on 24 May 2004 - 08:19 PM in General Nerf
<EDIT>Whoops. At the time, I also had my B'nA with a new spring that was double the gauge of the standard spring. It also might have been 3/8 inch plexy glass too.<EDIT>
Blue = Cxwq
#26942 Nerf Hurts
Posted by GeneralPrimevil on 24 May 2004 - 08:28 PM in General Nerf
#27001 Just A Thought...
Posted by GeneralPrimevil on 25 May 2004 - 03:37 PM in Homemades
#27002 New Use For Ball Valves
Posted by GeneralPrimevil on 25 May 2004 - 03:47 PM in Homemades
Do you mean so that it opens easier? because if the spring itself opens it, then during refilling one has to keep their hand on the valve handle. I was thinking of something very similar to this, but ruled it out because of that. Instead I just use the thumd on my left hand to assist, once I get my homemade working again. Solenoids operated valves, however costly they are, are pretty much the best choice for a quickly opening valve. As for a latch, what kind of valve handle? If it has a plastic double wing design, just drill a hole and hook up one end of the spring to it. If it has one handle, I guess the same thing, except it's metal, so use of a stronger bit and more powerful drill is needed.
#27003 Rajghjg
Posted by GeneralPrimevil on 25 May 2004 - 03:57 PM in Modifications
Magnets? That was a brilliant idea. Too bad I stopped using the RF20. I even took the pump out and used it to replace my super soaker pump. Now I have an SM1500 pump on the RF20. Sucks like no tomorrow.
#27005 Rajghjg
Posted by GeneralPrimevil on 25 May 2004 - 04:47 PM in Modifications
#27062 Just A Thought...
Posted by GeneralPrimevil on 26 May 2004 - 04:54 PM in Homemades
As for the anti-tank weapons, I was thinking more along the lines of one very powerful homemade that was about five feet long and shoulder fired. Maybe solenoid operated?
Accessories for the cart are endless. I mean, neon lights around the base, chrome pipes, chrome bumpers,anything. Unfortunately the plywood would cover it all up.
#27071 Just A Thought...
Posted by GeneralPrimevil on 26 May 2004 - 07:03 PM in Homemades
I might be able to go there this summer. PM me the whereabouts and stuff because we don't want to hijack my thread. I might be able to bring a few (like two) friends. They don't have very many weapons (one has a T3, the other a PC, who might be buying a NF, and a weird Batman gun thing) but I am going to be lending the one with the T3 my RF20, and the PC one my homemade. That way they will have a bit more and won't suck too bad. I'll give profiles of both on a PM if you want.
#27080 Nerf Hurts
Posted by GeneralPrimevil on 26 May 2004 - 07:43 PM in General Nerf
#27081 New Use For Ball Valves
Posted by GeneralPrimevil on 26 May 2004 - 07:49 PM in Homemades
#27082 1500 Spupermax
Posted by GeneralPrimevil on 26 May 2004 - 07:57 PM in General Nerf
Interesting. I was just opposing the fact that a SM1500 could hit 200 feet, now I'm telling a possible way to do that. I'm a hippocrit!
#27097 Quick-reload Barrel System
Posted by GeneralPrimevil on 27 May 2004 - 05:05 AM in Homemades
#27114 Nerf Hurts
Posted by GeneralPrimevil on 27 May 2004 - 04:35 PM in General Nerf
As for felt, I can barely get felt tight enough around 1/2 inch backer rod in order to get it in 1/2 inch PVC. I was able to get it to fit in 3/4 inch PVC nicely though.
#27121 Arsenals
Posted by GeneralPrimevil on 27 May 2004 - 05:46 PM in General Nerf
-Super Soaker XP55 with cardboard barrel (15/32" ID), non-magnifying scope (accurate up to 45 feet), ten dart ammo holders, homemade ramrod (SM3k valve puller shoved onto an unsharpened pencil) and RF20 pump; painted green.
-NF (stubby modded) with Crayola breech and 1/2" of 1/2" PVC for a barrel stub; painted green.
-AT3K with Crayola barrels, removal of Goo Tube (replaced with 1.5 feet of tubing), air release valve plugged.<EDIT>Currently has one barrel, breech loaded, gets NF ranges<EDIT>
-B&A with 3/4" inch PCV barrel (for Nerf megas), spring stretched, forward handle replaced with 3/4" PVC and styrofoam, used rarely; it has no practical purpose and it sucks.
-RF20, stubby modified, clip modded, SM1500 pump added, valve instead of trigger, semi-auto valve removed, bladder bike tube modded (inner and outer), safety guard on top thing removed, used rarely; I hate full auto.<EDIT>currently not in working order. It shoots a little over ten feet and skips every fourth dart<EDIT>
-BF, top barrel disabled (busted, would let air through when pumped), no barrels at all, no pump, not in use.
-Homemade, cardboard barrel (17/32" ID), muzzle loaded, Crayola breech, double ball valve, BF pump, no endcap on tank, not in use.
#27122 Nerf Hurts
Posted by GeneralPrimevil on 27 May 2004 - 05:49 PM in General Nerf
<EDIT>The "felt" is actually fleece. My bad. But still, having really powerful guns that shoot really heavy Stefans is sweet. Here's a pic of a can that had one shot from a supersoaker shooting a half ounce weighted half inch Stefan.
file:///C:/Documents%20and%20Settings/Administrator/My%20Documents/My%20Pictures/can.jpg.jpg <EDIT>
#27136 Arsenals
Posted by GeneralPrimevil on 27 May 2004 - 07:09 PM in General Nerf
Cx, you have one huge pile of weaponry. 64 guns. You could arm a battalion!
My AT3K now has one barrel, it gets farther than my NF and almost as far as my Super Soaker. I might get 2 SS1s. It depends on my sister's boyfriend (he's the one that has them).
#27334 Arsenals
Posted by GeneralPrimevil on 31 May 2004 - 02:15 PM in General Nerf
#27394 Nerf Bb Guns
Posted by GeneralPrimevil on 31 May 2004 - 08:47 PM in General Nerf
[]::::[]
[] is small section of FBR
: are BBs
6mm BBs are .24 cal. If 1/4 inch aluminum tubing is used for the barrel, there would be a .1 inch gap. That would make some powerful gun. like a maxshot, have less muzzle velocity, making it safer, in theory.
#27475 I Need A Quick And Easy Rf 20 Mod
Posted by GeneralPrimevil on 01 June 2004 - 06:53 PM in Modifications
I don't like the sound of that. ALL of the hoses on my RF20 are exposed, and against my arm. Anyhow, you are better off with a NF for a longer range gun. Unless you want to do some extensive replacement of parts on your RF20, like hoses, barrels, bladder, pump, valves (or valve if you get rid of the select fire feature, like I did). Basically you are better off with a NF for range, but keep your stock RF20 for closer range combat. The full autoness (word?) will come in handy when if the situation gets in real close.When you push this gun, it breaks completely. Vinyl explosions.
#27542 I Need A Quick And Easy Rf 20 Mod
Posted by GeneralPrimevil on 02 June 2004 - 02:33 PM in Modifications
#27555 Yeeeeah Bitch!
Posted by GeneralPrimevil on 02 June 2004 - 05:19 PM in News
This all is a bit confusing. I should ask my brother about this. He'll give me the gist of it. After all, he does this for work. It seems quite neat. I may have to get into this, just to impress friends and stuff. This probably doesn't mean anything from a firearms recognizer*, but that work is pretty damn good!
*I can identify and classify about 250 firearms, not that great, but good enough that teachers come to me. I'm not obsessed, it's just that I needed to prove a few people wrong, so I got into it.
- NerfHaven
- → GeneralPrimevil's Content
- Terms of Service and Privacy Policy
- Code of Conduct ·