Jump to content


Nonsense Man

Member Since 29 Jul 2007
Offline Last Active Dec 29 2016 10:19 AM

Topics I've Started

Just A Small Pm Title Annoyance

06 October 2008 - 11:56 PM

This problem isn't a huge problem at all just a slight annoyance. Apparently the title of a PM (or a thread title but I'm not sure about this) can contain 40characters (spaces included) but it lets you keep going after that but cuts off everything after that 40 mark which can create a slight annoyance. Like when I asked groove for a nerfstrong band apparently I had spelt band "brand" so the the title came out to be "I would like to reserve a NerfStrong bra". Again not a real problem just a slight annoyance.

My Turreted Nf

28 September 2008 - 08:31 AM

Well I got quite a few pm's about this gun. So I thought I should post the internal pics I took of it.

The gun about to be put back together with everything in place
Posted Image

The back air restrictor showing how I kept the seal.
Posted Image

The front AR all I did there was slowly shave it out with an exacto knife so it would fit the 17/32
Posted Image

The actual turret here you can kind of see the 1/2in(I think though im not sure as I cut the part with the label off for this project) petg I got from my local pet store. I put small stubs into the bottom of the turret with e-tape on them holding the main barrels.
Posted Image

Then here was the final product but I shortened the brass.
Posted Image

Lubing Turrets

22 September 2008 - 10:32 PM

I recently purchased some at2k turrets and one of them is kind of stiff to use. I have my silicone spray lube for my guns. I was wondering if it was safe to also use it to grease my turrets? I am thinking it would be fine but don't want to screw up my turrets.

Need Help Finding Specific Foam

21 September 2008 - 09:45 PM

Well a while ago I fit almost all my guns with OMC's thick walled petg at that point I had my CS style darts apparently all my darts were left in the humid garage and shrunk. I purchased fbr from ace and home depot neither of them fit it very well. But I have about 15 FA24 darts (I think they are red firm and fit OMC petg perfectly). Does anyone know any foam I can buy that fits my omc petg nicely? The optimal length would be around 200' or more.

Anyone Need Big Salvos?

14 September 2008 - 04:05 PM

I found some real cheap big salvos here. For $6.80 a piece it seems like a good deal to me. If their is another thread this is supposed to be in I'm sorry I couldn't find one.
EDIT: Shit can a mod move this to the general section?