pengynerfer

Before i begin this, i want to acknowledge that this was an idea made off of CustonSnake202s "New Version Bbb Mod"

Okay.

You need an xacto knife, a crayola marker, a screwdriver, and masking tape (anda BBB)

First things first. take apart the front half of the gun.

Pull out the barrel (front part)

You should see the air restrictor. On mine it was glued together, but there are 4 parts, the orange tip, the little stick, the spring, and the "bottom thing"(with three holes in it)

Throw that entire thing away.

Put back together the gun.

Now look at the tip of the barrel. You should see 4 grooves. cut those out, then sand the entire front half inch of the barrel until a stock micro will fit in.

Now make a crayola barrel. Mine was a hair under 2 1/2 inches long.

Using 3/4 in masking tape, tape a few layers around the bottom of the barrel (whichever side has more crap in it)

It should fit snugly inside the stock barrel.

The gun can now fire stock micros well, and streamlines at least 70', almost certainly more.

And if, for some reason, you want to fire those crappy arrows, push the barrel all the way in. it is very easily ( with a pinkie) pulled out again.

This isn't as good as most other barrel replacements, but its quite good, due to the fact that you dont have to wait for epoxy to dry or anything. you could do this in a car, assuming you had those materials.

This is my first mod, so i would appreciate comments/questions

Pictures and ranges coming soon

And yes, you could do this as a "lazy boy mod".