Jump to content


Member Since 11 Apr 2007
Offline Last Active Oct 24 2013 05:59 AM

Topics I've Started

Quick Pas Question

04 April 2009 - 08:50 PM

Today I finally went out and got a new PAS. I finished modding it just a few minutes ago and I think I am having a problem because I modded it too well :D. The seal from the barrel to the plunger is 110% airtight, and when I go to cock the gun, I have to press it up against my hip to get it to catch. I have the stock spring, a LS spring, and a RFSG spring. Without a dart in the barrel I can cock it normally but with one in, it takes too much effort. I am wondering if there is a way to fix this with still keeping the range up high. Any help is appreciated.

Quick Queston On Triggerblaster

20 March 2009 - 08:17 PM

Hello Haven. I'm modding my SupaSplat Triggerblaster for tomorrow, and I'm stuck. I can't seem to get the trigger hooked up correctly. The metal spinner thingy doesn't seem to be in the right place. For those who don't own one, you will have no idea what it is even with pictures, so I'm hoping some with knowledge of this blaster can help me out.

P.S. If someone has internal pictures aswell, that'd be even better.

Need A Little Help

22 February 2009 - 11:56 AM

Well, I was hoping to be able to get this done all by myslef, but I'm stuck. I neen a way to connect the Magstrike trigger, to the AT3K valve pin. Here are some pictures...

Posted Image

Posted Image

Any help is appreciated.

New Angel Breech...

21 January 2009 - 07:46 PM

Hello everyone. a few months ago I was working on a Longshot, when I wanted to do an Agel breech. I didn't have the tools to work with brass at the time, so I set out to find a barrel material that came in an abundance of sizes. I came across this Chinese market, and there was a fish store. I remembered someone said that PETG was for tanks, so I went in to see what I can get my hands on. I grabed several feet of each and came up with the following...

Posted Image

That is the rear section of a PETG Angel breech.

here are some other angles...

Posted Image
bottom view open.

Posted Image
Top view open.

Posted Image
Top view closed.

Posted Image
And this is my sloppily painted Longshot, which will soon be done by hand, with a Shotty Foregrip.

The Gnbkgtitbge

08 January 2009 - 08:36 PM

At WCNO, K9Turret asked me if I ever did any sort of original modification, and that got me thinking, almost alll my blasters have been modified to what I want them, most of them have been given write-ups a few weeks/months after I do them. That means that they aren't as original as I thought, but that ends here.

A few days ago I got a PM from Applefurry asking me to co-host a Nerf war (that's right, anther Ontario Nerf war, the youngings are taking over!), since I am not allowed to release any information untill we get enough of it oursleves, I'll just say that the venue we were planning on using requried a small gun *cough*CQC*cough*. So I set out to mod a blaster that had a lot of accurate shots, controlled shot speed and easy reloading capabilities... that had to fit in a small shell. First think that came to my mind was a Nitefinder, but that was only one shot... so I though about two Nitefinders, but that's only two shot.. then I thought about thrre Nitefinder, but that's just fucking ridiculous. After ling in my bed for atleast two hours I got up and gathered a few things. I call it the Ghetto Nikon Brawler Kid's Gun That Is The Best Gun Ever, but for short, Just Ghetto Nikon Brawler Kid (inside joke). Enough explaning, now I'm just rambling, so here is what I came up with.

Posted Image

It's a Manta modded Nitefinder (CrappyTire special, 2 NFs for $8.98) with an integrated 3K and RSCB setup. It's almost what I wanted, but that's still not enough. I plan on adding this...

Posted Image

You may be able to see in the first picture-I already have one Hornet tank in the extra space where the light used to be. When I tried to slap it on, everything fit well, but I was really leaky (I'll talk to you, Angel, at Massacre).

I started gathering pictures of the process for a writeup, but I just figured everything you need to know is in the completed picture.

Me holding it...

Posted Image

Close up of the AT3K trigger-ish thing...

Posted Image

Where I originally cut. I ended up cuttiing about a MM under the screw port...

Posted Image

And before I slashed it away...

Posted Image

I'll be sure to add some more pictures when I get those extra tanks added.

P.S. I probably won't end up doing anything cosmetic. I kinda like the look of an organized, sloppy blaster.
P.S.2. I will also fit an L.E.D light in the upper open port where the crappy light used to be. I play a lot of night/dark games so it will be a lot of help.

EDIT: Sorry for large pictures, I'm not so used to all this pic stuff yet, but I'll get it soon. And in the first picture, the NF barrel looks crooked, it's not, but the pump handle is, I'm fixing that right now.