Jump to content


mysterio

Member Since 24 Nov 2010
Offline Last Active Feb 15 2018 08:13 PM

Posts I've Made

In Topic: Scepter operating PSI

12 February 2018 - 12:15 PM

IIRC the scepter used a hard tank with a hammer valve to regulate shots. I've had some success with using a pulse master style spring loaded pressure chamber instead of a layered bladder for this kind of application, but you definitely trade off volume for pressure.


In Topic: Vancouver Island Nerfers?

16 December 2017 - 11:53 PM

Hey, are you near Campbell River? I'll be there for a bit this winter for vacation, if you'd like to hang with another nerfer. There's a BC nerf group on facebook that also seems to be pretty active, albeit on the mainland.


In Topic: JSPB B&B mini-hopper

13 June 2017 - 11:10 PM

Or do like Doom used to/does and make bladders out of rubber (bike tire?) segments and hose clamps.

 

The bladders were made of LRT from Mcmaster and layered with bike inner tube.

 

Source: I did it once.


In Topic: Nerf Jolt/ Bigshock Plunger Tube Dimensions

09 June 2017 - 04:18 PM

Thanks! I have another question though. Would be a 3d printed Plunger Tube count as a viable option?

 

In addition, many 3D printed parts are not airtight.


In Topic: High Cap Magazine Collective Brain-Spew

05 June 2017 - 04:18 PM

Then you may have missed the part where I've got a 100-dart coil that *is* blower fed sitting in my garage *right now*. I need switches and a trigger (and ideally, different flywheel motors than stock) to make it possible to use, and I'd like to test the blower on a 3s but have heard from several reliable sources that it'll be fine.

Meanwhile, I'm working on seeing if I can make it both quick-changing and more compact lengthwise.

 

Meaker, if you can get a preliminary writeup going I would definitely be interested in trying to replicate it.