mkbae

so if i was going to make one of these(which i most likely will). where would i get the bottom gun and the top gun shell that you used to hold the barrel extension(or at least i believe thats the barrel extension from the front gun)?

You should be able to pick everything up at your local airsoft shop. Usually AEG m4a1's comes with a spare barrel cover but the package runs about $90 dollars. You could pick up a cheap clear plastic model from Walmart for around $30 bucks and paint it later, but the Walmart m16 airsoft barrel cover is not seperate from the rest of the gun so you'll need to saw it off and trim it with a dremmel. The bottom Grenade launcher is about $35 bucks alone, and you can find them only in a local airsoft stores. Just make sure it fires 10mm painballs instead of 6mm pellets. Remember it costs a bundle to make it look the way it does, if you don't already have all the parts. I collect Marui's and special ops, so I have ton of these parts collecting dust. If you really want to make one be prepared to spend about $60 dollars extra on top of the LS.

How much was that airsoft gun?

I have arount 15 airsft guns. I just used left over parts for the cosmetic work. The airsoft loser rifle came with spare parts so all the parts actully didn't cost me any.

Why waste a airsoft gun?

My UTG shotgun can't get 10 feet with nerf darts, how the hell do you get 100 feet?

Is it a Mauri?

Usually UTG fire 6mm bb's. The air chamber that usually fires those 6mm bb's are just too small to get distances above 50 feet. I used a launcher that fires 10mm paintballs. These launchers have a comparable air chamber to that of night finders. With some treaks, its not that hard to get 130+feet.
And for the other question. No I don't take it out side. I had to go out 1 AM when no one was outside, to test fire this. Ebay cancelled my listing twice because they thought it looked too real. I actually had to de-modify some parts, like the priming handle. I used the priming mech from an broken airsoft AK47 originally, to make it look less real ;-). So to answere the other question. I modify Airsoft rifles for fun and doing so I kinda had some left over Airsoft parts lying around.

Yeah it is, look at that small watermark on the first picture right hand corner.

How does the second gun work though?

its a simple prime and shoot. The launcher has a shotgun style handle so you just prime it once and shoot with seperate trigger located just infront of the Longshot clip

Isn't that up on ebay? And how did you convert the airsoft grenade launcher to nerf? Did you just slap a reducer on it?

yes its on ebay. I thought I should post pic before I send it to a new owner. The launcher has a cpvc molded on to the front of the piston.