thesoxfan1234

Illinois Nerf Outing 2!
If this is your first war, check out this thread, it explains the rules and shit, and welcome to Illinois Nerf!

If anyone can bring mobstacles, that would be great! (I will make a few mobstacles, but the more the better.)

Date:
July 14th. 9:30-3ish.

Location:
Google Maps link:
https://maps.google....002384,0.003449

-Lockport, IL. 60441.
There is bathrooms and electrical outlets for anyone wondering.

What to bring:
-Primary, pistol, things break so bring backups.
-Things to trade/sell
-Darts (200-300) check dart rules section for restrictions.
-a good attitude
-people
(bbbb's are allowed if stock OPRV is intact and no tank expansion, etc.)

Dart Rules:
-No hot glue domes.
-Silicone darts without felt pads are allowed, though they will be checked over.
-#6 washers only and #8 washers are allowed, #6 heavily preffered.
-Darts must weigh less than a slingshot weight.
-If you darts seem heavy and/or unsafe I'll rip one apart to see what it's weighted with.

Rules:
-Don't bring anything illegal
-No singled titans.
-Must have a parent or gaurdian if under the age of 13.(unless you are a guest of a attendee over 13, that is fine.)
-If something is too powerful I will ask you to tune it down or put it down.

Schedule:
(all gametypes will be explained before rounds for people who don't know how to play)
9:30-10:00 Setting up, arriving, ETC.
10:00-10:30 TDM(team deathmatch, supa basic 3:15.)
10:30-11:00 Defend the Core
11:00-11:30 Carpe Testiballz.
11:30-12:30 Lunch
12:30-1:00 Freeze Tag
1:00-1:15 Blob round.(they usually don't last long, but are fun)
1:15-1:30 King (VIP Elimination)
1:30-2:00 CTF
2:00-3:00 TDMZ (teams of 3, 3:15, once all 3 lives are gone, you're a zombie.)
If we go past 3 (most likely) you guys pick.


Attendence

thesoxfan1234
ACENerfer +4
Raven
Bchamp

Maybes

Demon Lord
KaneTheMediorce

I was wondering what gun outputs the most air, a buzz bee big blast or a titan? I have to use a shotgun attachment at wars so I want the most range in a four dart shotgun. Thanks in advance!

Nerf Nitefinder Modification
Materials
-1"thinwall petg - found at Petco
-1 CPVC coupler
-Plumbers Goop
-Hot glue
-Nerf Nitefinder

Lets get started. Shall we.

First open up your nitefinder and take out the plunger tube you don't need it. Now take your petg and goop a CPVC coupler into the front using E-tape.Now that that is done measure your plunger tube using the stock plunger tube and measure where the closest end of the coupler is where you should have you plunger tube. Now cut it to the exact length of the stock plunger tube.Now to add Springs just put your combo in the plunger rod and wrap some E-tape under the plunger head and LUBE IT UP!.

Now cut out the front so the plunger tube can fit inside.

Now glue the hell out of the plunger tube... MAKE SURE YOU HAVE YOUR PLUNGER ROD IN WHEN YOU GLUE IT DOWN! You cant get it back in.

Pic of how it should look when you have all your internals done...

Put everything back in the right place and close her up, add a barrel and go shoot someone!

Final thoughts: I love the way the seal is with the PH, I use that all the time in my nitefinders. I got the PR from a friend, that's why it is black. I hope this helps. This was my first writeup, so the pictures could be better. If I were to make another writeup I will focus the camera better. Ranges with a [k26] in this blaster are about 70's.

I finally got time to post a bunch of things that explains my excessive posting

Hey everyone, to start I am a fairly new member and this question most likely have been asked, but why is 1/2 pvc called "1/2"? It has no relation to the diameter of 1/2. I am just curious to know why.