Jump to content


LM037

Member Since 31 Oct 2003
Offline Last Active Nov 04 2003 09:50 PM

Posts I've Made

In Topic: Need Some Help With At2k (newbie)

03 November 2003 - 10:53 AM

Thanks for the help. I decided to go with what you said, shooting only the 1/2 stock micors. I opened the gun in 5 minutes, and did a few hole plugging with my glue gun and changed the barrels. I looked for the 1/2" Sch. 80 PVC and could only find the 1/2" Sch. 40 PVC, which seemed too thich so i had the guy at home depot make me 4 tubes of copper (1/2").

Instead of sawing off thebase where the tubes normally fit, i sanded/crapped of enough plastic for the copper tubes to fit into it. I then took one of the plastic pieces that come inside the tube (looks like a square with 2 poles on the side, glued this in between all 4 tubes at the tip to keep them straight. This is my first mod so i was really happy to get it to work.

Thanks fo rthe help again.