Xakot

What/Who- UNCG Invitational https://www.facebook...?context=create

Where- University of North Carolina at Greensboro- 1400 Spring Garden St, Greensboro, NC 27412

When- April 20-21 2013, Final rules meeting will be at 11 am be there by 10:30 Gameplay starts 12
We will meet in front of the EUC on the lawn, Look for a circle with abstract statues

Event page- https://www.facebook...?context=create

Important notes-
*Must be 16 years old to play
*Campus wide game 24/2 gameplay
*Bring any blaster desired (excluding singled Titans) Airguns and heavily modded springers will be judged on an individual basis by the mods
*Small melee(smaller than or equal to the nerf Klaw hatchet) will be legal from the start larger melee may be unlocked during the game. Bring one if desired
*Please indicate you are coming on the event page.
*Mods will be wearing a Blue Bandanna
*Battery powered blasters will be legal latter in the game but not from the start, bring them if desired

(More updates to come on the event page)

Hey everyone, first post here and it's a pretty simple mod but I didn't see much discussion on springs for the little terror known as the triad so I figured I would post this up, here we go. I found a tek 4 and wondered what I could do with it when I realized the spring was actually decent and seemed almost like an elite spring in diameter.

You will need-
1x Nerf Triad EX-3
1x Buzzbee Tek 4 (because I hate them and I found it for $.99)
1x screwdriver
1x brute strength or wire cutting tool




Now open up the Tek 4 by removing the screws. This is pretty easy because they didn't glue anything on this gun like the newer ones (cough panther)


Simply pull on the pull back bar to remove the plunger rod and spring after lifting it slightly out of the shell or just remove it from the shell all together. The next part was the most annoying because they included some kind of internal spring system in the plunger itself to where the bar doesn't actually separate from the plunger, but we are only interested in the main spring. Compress the spring and bend the bar back and forth until it breaks or cut the bar with a cutting tool like pliers or wire cutters.
(while your at it unscrew the bottom of the Triad and remove the plunger and unscrew the plunger head to slip off the spring)


The Tek 4 spring nests perfectly inside the Traid spring with a little screwing to get it inside. I elected to turn the plunger pull sideways for convenience as mentioned in many other Jolt and Triad mods. Compress the spring a bit in order to screw the plunger head back on making sure the + shaped rod lines up in the slot on the bottom of the plunger head.



Comments, suggestions, flames?

Ranges are impressive for still having the needed air restrictors, parallel to ground
Low- 64 feet
Averages- 75 feet
best- 91 feet


P.S. if anyone could help me rotate the images that would be great
(fixed some spelling mistakes Jan. 23 3:46 pm)

Hey guys i recently got my hands on a classic ls and ironically i have dabbled with almost every blaster but it in the last few years so i have no experience with them. My question its besides an ar removal, spring replacement, reinforcement, and sg's version of the Angel breach what proven mods would be beneficial for a max rof high range hvz primary? Or would it be wiser to wait on the OMW immortal kit and if so would the performances be comparable?