SK8R

Here it is......

Cap hot glued shut

Took off the grey plastic from the back so the pump can be pulled out longer. (For shorter pumping time)

Hot glued a ball valve to the front and glued some CPVC to the end of that.

Here is what it used to look like
Ranges are 50-60 feet with 25 pumps.

Let me know if you want me to do a writeup.

Ok, this is my first write-up so don't start being haters. I know all of you probably have done this before, but I decided post it for the heck of it.

Materials: -Crayola/Rose art marker
-A saw or exact-o knife
-E-tape
-Hot glue
-A reverse plunger tube


Step 1: Get you marker out and mark down the spot you want to cut.


Step 2: Cut the front part of the plunger tube off and also remove it from the bolt sled. (There should be an indent were the AR was.)


Step 3: Cut you marker down to the size that you need.


Step 4: Hot glue or e-tape (or both) the marker to the plunger tube.


Step 5: Attach it to the bolt sled.


Step 6: Put it back together and you're done.



And yes I know it's messy, I did this at one in the morning so give me a break.

Ranges: Ok, i got the ranges. Surprisingly, the farthest I got was 90ft. The average was around 76ft