Rylan

After using a paint like polymer called Plasti Dip, I realized what it could potentially be used for.
I figured that if I add enough coats to the stefen, it might form a rubber tip that would be softer and safer than a normal stefen.

sorry if the pictures were too big. Let me know what you think

Edit: the ranges are noticeably effected and the plastidip has no effect on the foam
Sorry if revised idea of another individual

I've been suspended for 3 months and I don't know why but I think it's because I didn't say thanks correctly.
remember to follow the code of conduct so you don't get suspended.
So I haven't really been involved in much but I have been noticing some things in the offline world of Nerf.
My friend bought a new recon and the power is insane, the range of his stock recon is the same as my modded longshot, it's great for indoor wars.
I have also seen prices rising and dropping like $5 nitefinders and $60 vulcan (rip off, I know)
I have also been finding new things at my local dollar general like single packs of reflex IX-1 blasters also known as "eliminators" for $6 and twin packs of nitefinders for $15.
That is what I have seen in the past 3 months.
For those that are going to tell me to post in the product awareness thing just don't comment.
I hate the product awareness anyway
I know it's not really much to say but 3 months of being suspended is hard on me
I am also wondering what I should use to link triggers like with the longshot front gun integration
thanks

i bought a belt blaster and wondered why there arent to many mods online for it, and that's why I am rebarreling it to shoot much further than normal.

btw, READ ALL OF THIS BEFORE POSTING A COMMENT

For this mod you need:
-belt blaster
-barrel material that will fit your darts, I used 1/2 inch cpvc after i did this post
-thin wall 1/2 inch pvc sch. 20 i think?
-hot glue
-extra springs if wanted
-screw driver, hammer, hot glue gun, E tape
-fingers would be helpful



first, unscrew your gun, duh
and like always, there is a hidden screw under the pump, and another thing, the pump doesn't come off the rest of the shell so don't act like me and try to rip it off


before we proceed, take these pieces out, we don't need/want them


grab the plunger and start by putting a screw driver in the top of it


and hammer out this piece, this is just one option but you can do something else to get it out


now take the spring off of it


glue your barrel to the plunger


i put foam on the end of the plunger from the darts we will no longer be using


notice that the original barrel that the darts traveled through holds 1/2 inch pvc really well, so you can put E tape on it to give it a nice fit and do the same for the cpvc or whatever you are using so it fits in the pvc
then put everything back together and if done correctly, it should look like this...


cut the barrels to fit if you havent done so yet
TADA
the stock ranges were:
flat
21'
16'
28'
19'
16'
angled
30'
32'
35'
37'
29'

the ranges now are:
flat
40'
45'
43'
49'
41'
angled
79'
81'
88'
85'
80'

average:
before
-flat=20'
-angled=33'

after
-flat=44'
-angled=83'


it performs nicely and if you want, you can put a breech or a coupler in the the spot the belts went in



my friends dont like it so i have no use for it
you can make an offer and if its reasonable, i will send it to you
dont post the offer here though just pm me

READ THIS
I know the pictures are to big, so how do i fix it
I know I destroyed the rof, I have two so it was either this or never use it

My sister got a maverick and the thing we noticed right away is the range is junk so i removed the ARs for her, but now some darts don't even leave the barrel so what should i do, re barrel or throw it out or are other changes needed


Thx

I recently bought a Vulcan and noticed something different about this one than my first one

(I dont know how to post pix)
hows this
http://sites.google....?attredirects=0
http://sites.google....?attredirects=0
http://sites.google....?attredirects=0

Try going to my webpage:
My Webpage

The problem is that I can only do the 50 dart belt mod if one belt is upside down- it still works- but I cant do 100 dart belt mods
can someone post a mod to solve this even if it ends up removing a cartridge or two like a 98 dart belt mod
also, the one cartridge is green, it's dumb I know