Jump to content


ModSquad

Member Since 25 Jun 2009
Offline Last Active Jul 28 2019 12:41 PM

Topics I've Started

Raider Cocking Handle Relocation

06 July 2010 - 07:26 PM

Sorry GIANT pics. DO NOT COMMENT!!!!! Also I am to lazy to resize tonight.

Dt3 Mod For N00bz

26 June 2010 - 04:27 PM

There will be 2 options for barrels so pay attention!

For this mod you will need...
-A blade of some sort
-E-tape
-CPVC coupler (for barrel option 2)
-CPVC

Lets start with why I did this mod. I got a DT3 at a thrift store and all I did was lube the plunger head and put in a 3" CPVC barrel. This was getting me decent ranges, but I wanted more. I find the handle to be extremely comfortable and the gon to be underrated. So enough talk and onto the mod.

First: Open up the gun by unscrewing all 7 screws. (6 for me because when I got it it was missing 1 screw)

Posted Image

Here is a pic of the catch and trigger area for easy assembly later on.

Posted Image


Next take the plunger assembly apart and wrap a piece of cut down E-tape once around the little nub on the end of the plunger tube.

Then get this piece and cut out the + like shown in the next picture out with some type of blade.

Posted Image

The + cut out.

Posted Image

Then put the piece you just cut the + out of onto the piece you put the E-tape on.

Posted Image

Then move onto the barrel which has more holes in it than swiss cheese.

Posted Image

Wrap where the holes are with E-tape.

Posted Image

If any tape goes over the little lip just cut it off.

Posted Image

Then put the barrel onto the plunger tube like the picture below dEffeminatets.

Posted Image

Wrap the end of the barrel and the plunger tube with E-tape. It doesn't matter if any gets onto the plunger tube.

Posted Image

If you did everything correctly than your plunger tube and barrel assembly should look like this.

Posted Image

Now move onto the plunger rod. You can fill it with epoxy putty or not.

Posted Image

Take the plunger rod apart in this order.

Posted Image

Posted Image

What Gun Should I Make Into A Nerf Gun

17 January 2010 - 06:08 PM

I have been working on a Barrett M 82 so don't be telling me to make one of those. If you chose other please post in the comments what gun it is. If you want a gun just post in the comments and tell me which one you want.

For you people who want a gun you will have to give me some time after all I am a human not some factory who can churn out 5,000 models an hour. If you want your gun painted just check out my painting thread coming soon.