Thelonious

Since JSB hasn't jumped in yet, I'll say it. You don't want a dome of hot glue sticking out the end of the pump head. This will ruin the check valve in the pump over time. Pull that clump out, and re-apply just enough hot glue so that it will seal the OPV, and leave a depression in the pump head. You don't need much glue at all.

Following your advice, I have taken a razor blade to that *lump* of hot glue and now it won't be ruining my check valve anytime soon

Draconis: I will be heading to the local hardware store for some RSCB improvements. I thought i had some half inch copper tube laying around (from newb days) but I guess not...

billyblue888: All five shots are getting in the fifties. I just figured the RSCB would reduce ranges so I didn't think to hard on it.

pinz321: Thanks

Hi Yah!: I know that would help. Maybe asking five shots out of this lil' gun was a stretch.

MrBadWrench: This, at the time, is my universal blaster. So switching from long range to clipped goodness is a perfect idea.

I'd like to thank all of you for your input so far!

That would greatly reduce volume I suppose, seeing as how my clip is 3/4 CPVC. Thanks polycarb :]

~Theo

Lastly, put in the barrel of your choice. The ranges of a 6 inch CPVC barrel are between 85-90 feet.


Sadly, with my five shot RSCB, the ranges are reduced down to around 50 feet(am I doing it wrong?).

please not that in the image, the barrel may seem crooked(bent downwards) it is not.

This is my first write-up. While I know that this gun has been modded before, I'm just breaking the ice, so be nice :]
If you have any questions, comments, flames, or concerns, please leave them in a comment or PM me.

~Theo