princexbuster

MUSTACHE REQUIRED
All atendees who do not have a moustache will be forced to draw a line on their upper lip.
Day:Feb 28th
Time: 10 till when ever you nancies want to go home
Hosts Flamincows and princexbuster
Location: The location is still being descided but it will be around here
Bring protection... of the eye variety
food+water/beverage of choice (ie. pop, gatorade, vitamin water, orphan tears, etc)
leave your wine coolers at home.
Nerf guns
darts
dress accordingly

Game types played
mostly 5/0 and 3/15
a couple pistol rounds
defend the core
This is a nerf war, we will just do what we want.



Attendance:
princexbuster+2
flamincows+2
Nerfmonkey+1
Soulscud( membership here?)+1 I think
sublimedom777

Maybe:
Your mom


I made special darts just for this.

So a couple months ago the trigger to my trusty bbbb broke. I repaired it useing one of these.

Through trial an error i came up with this.
You first drill two holes, one from the front of the trigger and one from the bottom for the hook to come up through. It takes a little feness the get the hook through the hole but it should go.

The cutting down on the trigger made it so i couldn't use the return spring. My solution was a cut up hair tie (i have long hair) strung through a gole drilled in the side of the trigger and then glued in a way so it makes the trigger return. Also it would be better to use super glue.
Anyway, the new trigger (being made of metal) wont break and takes alot more stress.
The only downside, it now breaks here.

I need to fix this but im pretty much stumped. The only thing I can think of is maybe a small eye bolt but I dont know if that will hold.

Any suggestions? Questions? Cheesy pickup lines?

Not sure what topic to put this under but im kinda in a hurry.
Today I was painting my Big Blast and my At3k in my driveway (I have no room with adequate ventilation). I had to run to the store for about ten minutes. As luck had it, it began to rain while my Big Blast and most of my At3k internals were hanging in my driveway. Needless to say, they got quite wet.

My question: What seems to be the best way to dry out you blaster with minimal damage?

My solution: Get very pissed off at myself and the proceed in opening up the blasters, dry them with a towel/rag, and then put them under a fan to get rid of any remaining water.

Is this a safe route or should I dry this by some other process?

Last week I was in the Outer Banks and I found a mega missile at Kmart for six dollars, so I figured what the hell, why not buy it. We all know what a mega missile looks like, but for those of us who don't look down. (on the screen you pervs)

My pictures are big so you can see shit later, so don't bitch at me about it please.

The day after I got home, whilst floating in a sea of boring...ness, I decided to rip that sum' bitch apart.

I started by, obviously, taking all the screws out but that blue piece gave me some problems.
Do this to get the internals out of the shell if you're lazy like me.


I noticed that the internals fit almost perfectly into a hollowed out maverick shell. (I had one from a failed nitemav)


After a considerable amount of sanding and cutting, you get this. KEEP THE TRIGGER SPRING!


The pump tube is a little larger than the inside of the mav shell, so the slot serves a dual purpose. ( To alleviate some pressure and to make it possible to pump with the slide handle.)
Next is the task of getting the airtank and whatnot to fit in. You'll can pretty much eyeball it because later on that part wont really be essential.
You get something like this.

Third(?) is to cut out the part of the area around the trigger, but not so much that would let the trigger move around too much.
The picture is blurry, but you get the picture. (no pun intended)


Do this!

Also this!


I used part of a spring from a broken airsoft gun to tie the ring to the fireing pin.
Drill a hole through half the slide, through the hole in the pump, and then put your other half on and finish drilling. Put the rod from the mav turret through the hole and cut it to length, and glue to your little heart's content.

Now you can fit everything in there and it will fit if you did it right and i didn't leave out a step that you can't figure out.
You can just stop here and throw a coupler or something on the existing barrel, make a hole for the barrel and leave it at that.
I, on the other hand, decided to make it look pretty... kinda... not really, but it looks better after this.
So, you cut the front of the mav shell and nest some 1/2'' cpvc in your recon barrel. Make sure to leave room for the existing barrel to fit inside the recon faux barrel. I like to put a piece of a big blast barrel inside to make it easier to get the dart to fit into the cpvc.

You get something that should look like this.

The recon sight is just to look pretty.
To finish this up you take the top of the mega missile shell and cut it down to look like this

YOU'RE DONE WOOOOOOO!!!!


Ranges are around 100-110 feet.