Draconic74

Whoa! That looks almost like the mod im finishing for my Titan. I didnt want to mess with internal stuff, so using PVC connectors i made a barrel. It looks really close to that. Unfortunatly, it only shoots about 20-30 feet. Its because the rubber stickers on the darts create too much friction on the PVC. Soon I'll have some homemade ones and I'm hopeing that tey go farther. I should try magazine page darts. How far did they go?

Because i only have about 10. That and im getting some backing rod soon. Also, its not the streamline problem, its that the rubber ends are rubbing (big surprise) the sides of the tube. That wil be fixed with the homemade darts.

First of all, i checked with my dad, and he said it wouldnt work. But im going to completely disregard that, and say it does. The new mod i have on the Titan works ok, but i found that it shoots less. The rubber on my stock darts are rubbing the walls of the barrel. I havnt had time to get some backing rod, but im going to do that as soon as possible. Other than that, the mod is awsome. Its not practical in a Nerf war, but unfortunatly there arent any around here that i can easily get to. Anyway, the basic idea of the mod is to not mod the Titan and instead add a barrel. So now i have 1 loser barrel and Im working on a four shot. Im sure it will be pretty cool when done.

hello, im new, but ive already made a small mod for my titan. i have refrained from posting until i had something to post. so here it is. i am pretty sure that i have worked some kind of calculation for optimum barrel length. supposedly, the air keeps going until it reaches atmosphereic pressure. so if the barrel is cut off right before that, i was pretty sure that it would have the most acceleration time without being sucked back by low pressure. heres what i came up with:

Tp=Titan pressure (unmodded titan air pressure from firing)
Ap=atmospheric pressure
L=barrel length
Rp=release pressure (pressure in barrel when the dart exits [should equal Ap])
BV=barrel volume

i found that the regular titan barrel is about 13.47 cubic inches.

Rp=Ap Rp=Tp/BV

BV=L*pi*r^2 + 13.47 (titan barrel)


so i just need atmospheric pressure in PSI and the unmodded titans PSI when fired. by solving for Rp, which requires BV, you should get L.

NOTE: this will only work for the certain mod i did. the mod i did does not require the titan itself to change in any way, the barrel simply gets an exstension. more to come when i finish the rest of it.