Capt Spaceface

Here's what I made when my titan's shell broke, it's just a titan's internal hotglued/ducttaped to a piece of 3/4" PVC. I didn't realize how much it actually looked like a panzerfaust (minus the missle and the launch tube thingy) until I was done making it. The black stuff on the orange tube isn't e-tape, it's hockey/grip tape, to increase friction and make a little bit more pressure build up before the missle shoots.

Here it is




Heres a close up of the front




Heres an actualy WWII panzerfaust



Ranges are about 60-70 ft with 15 pumps, a lil under 80 with 20 (both flat, about 4ft off the ground), but I never pump it more than 20 times.

I know I haven't done anyhting useful to the NIC, but I figured I might as well try with this, which I thought might be an alternative to epoxy or hot glue.

Mighty Putty

I know that the major downsides to this are that it's expensive, and you don't get much when buying it, but again, it's just something I thought was interesting.

I have a few questions about the Titan that I need answered before I buy go one.

1: What is the maximum range that a modified Titan can achieve with one of its rockets?
2: After plugging the pump, how many pumps should I be safe with? I don't want it to be underpowered, but I also don't want its airtank to explode or become damaged, ultimately rendering it useless.

Yes, I did try and search ,but at the time ,the search was not working, and I am going to order my Titan sometime tonight (hopefully), so I need these questions answered. After both are answered, Moderators, feel free to lock this topic.

I'm in the current process of integrating an AT2k into the front LS gun, but I've hit a few snags. One is the stupid gootube thing is just a space waster, and I need to remove it. Another problem is making the trigger pull the AT2k valve. Should I use some type of wire to attach to the trigger and valve? And how should I dispose of that stupid gootube?

I know that I may be a noob, but I think that all of us on the NIC (with longshots atleast) would benifit from a good longshot write-up (including barrel replacement, spring replacements, etc.). So, would anyone with the time and skills capable enough of making a longshot write-up please make one?