Find contentDo you all remember the old push pull crossbow with the missles that always seem to get lost?
Well I do and I thought how can I make it better. So here goes my first write up!
Well in this mod I converted the crossbow to shoot stock mico darts and made it into a spring type gun without the spring!!
So here goes.
you will need a
knife
hot glue
1/2 cpvc
latex rubber tubing
and of course the double crossbow
Ok
step #1
Take your crossbow, see the crappy reddish post things, cut them off at the very bottem.
(I took off the hold thing because mine broke when I dropped the gun.)
step#2
Take your cpvc cut it to the length you want (make sure you look at the bottem as they will slide over a bit) and put hot glue on the bottem and push it on to the purple stubs it should fit nice and tight and hot glue them to the crossbow
step#3
Ok, now take your rubber tubing and rap it around the crossbow and tie it make shure it is very tight.
like so
Now you have a rubber powered double crossbow!
Ok I got the ranges. Both tests were done with both barrles full and i am taking the range from were the farthest of the two darts landed.
3 shots Flat
shot 1 60ft
shot 2 58ft
shot 3 59ft
3 shots 45 angle
shot 1 67ft
shot 2 69ft
shot 3 67ft
Well there are the ranges
edit- Pics yayy!
Edit- Spelling, grammer, and more specific points.
