ledzepp2994

I know I posted this allready but with the new people joining i figured i would just try and get their attention again. so if you are from vt and nerf which i know there are some of you out there because the stores keep runing low on suplies such as guns and darts. let me know! eather e-mail me or add a post or do somthing to let me know you are out there. I'm going crazy! k thanks

ok and for all of you who are going to get mad at me for asking again I'm sorry but it needed to be done.

ok so I just found a sweet glue. it called "plastic welder" it works great here are its specs
best used on:
hard plastics
metals
concrete
vinyl
pvc piping
fiberglass

working time
4 min

Harding time 15 min

psi strength
3,500 lbs per sq. in

water proof

working temps
-40F - +200F

I have been using it all over and it never has failed and it doesn’t involve the huge process of epoxy and it dries so much quicker. one draw back. it smells

I have only seen it in a small family run store up here in Vermont so look around

This might not go here but feel free to change it

I was using a barrowed air soft spring powered pistol and noticed that you didn't have to cock it. Which made me want to crack it open and see how the cocking mechanism worked. all you had to do was pull the trigger it had no batteries or anything? I was in the middle of a war though and didn't have time to break it open. If anyone knows how they did this and how it works let me know because i would love to apply that technology to nerf guns which is why i chose to post it here and not in off topic. If it is off topic oops.

Ok so humm…
Yea if you read the title then you see get the idea. I have some friends that think that nerf is lame (there exact words were a little harsher) but the bottom line is that they are hard core airsofters and me being a nerfer I don’t have a air soft gun and don’t feel like paying $70 for one so I was thinking what if I made on or made a attachment on to a nerf gun for air soft. (Preferably a BBB). If anyone has any hints (because my first attempt failed) or knows where I can look that would be great. I know that this has been talked about already but nothing recently and what I did see didn’t help that much. I can make the barrel it’s the clip that’s the problem let me know if you have any ideas thanks a ton.

I need to show them who's boss

Ok so this might have been done before but I didn't see it and I’ve been looking for 3 days how to get my breach to work on my BBB I'll be posting that soon. But the purpose of this is to post you original idea breach. Try and keep the discussion to a minimum and use pictures . Say if it has any flaws and maybe some one will fix it and put it on a new thread.
ok here goes