gatewayf4

the same thing happened 2 me so i opened it up and the spring was bent a little so replace the mav spring with another spring

This is a write up on the nerf nite finder to make it have a manual revolving turret.

Stuff needed for mod:
Screwdriver
Hacksaw
1/2 cpvc
1/2 pvc
15/32 brass
dremel
pipe cutters
a 3k turret
a thick straw.

First unscrew the gun and take out the plunger assembly, you can throw away the barrel assembly.

Sand out the inside.

hammer a peice of cpvc into an inch of pvc, then glue that into the orange ring at the front of the plunger.

Cut the cpvc at about a half of an inch away from the pvc.

glue 15/32 brass into the cpvc so it comes out about a half of an inch.

Glue that whole assembly into the plunger tube.

put that in the ppk'd nf then close her up. it should look like this

then sand out the back of the 3k's turret so the 15/32 fits nicely in it, but can still be pulled out

Then find a hard straw that fits nicely over the metal rod that comes out of the back of the turret.

glue it here.

Now you are done, put the metal rod in the straw. and your good to go. mine looks like this.

messy as hell

today i finished my couplered nitefinder, and when i tried to cock it, it wouldnt catch. i added a maverick spring twisted into the NF spring, and i think that may be the problem, but it has so much power behind it that i kind of want to keep it. i also might add a more powerful catch spring, and see if that helps. should i cut down the maverick spring, or is there something else i can do?

i did that and mine works fine maybe u need 2 strech the spring on the catch out