dim3

Here is Double mavericks and double barrel mavericks in action video.
v Click link below v
Double Mavericks in action

Okay!
Update, there is always a room for improvements. I had to start from a simple mod so i can have a visual on how to improve it. I used the ipod nano because its thin, compact, quality is decent and nice video filters. So here is a more secured and proper mod. I have also made some test and shot this mod 1 foot away and it kept its stance.

Item
Ipod nano 5G with video.

Materials
Polycarbonate
1 or 2 screws
Electrical tape










I painted it after(optional)



Now once you have inserted you ipod and its not a perfect fit, this is where the electrical tape comes in.
You can put electrical tape on the inside to make it more fit and firm it in place. i had put 7 layers on mine.



feel free to comment


Thanks

My brother has been bothering me with modding his recon. He wants to move the slider from the back to the front. He gave me a couple of ideas and designs which became complicated. So i told him, i will mod it and keep it simple.

Here is the mod.

Materials
1/4" solid aluminum rod
2 screws


1. Drill a 1/4" hole on the sides of the flip-up sight
2. Bend one side of the aluminum rod then insert it into the flip-up sight then bend the other side to lock it in place
3. Drill holes on the ends of the rod where you will screw it into the recon. i used screws i got from a maverick.

It should look something like this:





The hole i drilled on the flip-up sight wasn't perfect. So make your adjustments.
You will also want to make small bends on the rod to help it hug the recon. And don't forget to clear the bottom rail for full slide.
I have searched and found Gas Mask Guy's mod. similar but it requires more materials and money

Hope this helps others.

video


Feel free to comment about this mod.
Thanks

You have seen the double barrel

You have seen the triple barrel

but how bout the double maverick?

this is not the fork looking mod like before.

This is the double and triple barrel mod.
Thanks to split who has also first posted the triple barrel.

My mod is very simple and clean.

What you'll need (double barrel)
1/4" stainless thick rod, 5" long
1/4" thick base wood
2 mavericks

1st Get your maverick and cut out according to the picture below


2nd, Drill a 1/4" hole, 1 1/2" from the rotating gear. And same on the opposite side. As shown.
Photobucket
Photobucket

3rd, with your 1'4 inch thick base wood. plot and cut according to diagram below


Then cut out the screw wings





Then assemble




Now your done with the double mav.

The triple maverick
You'll need
1/4" threaded rod
1/4"bolts
3 mavericks
1/8" thick styrene

Just follow these pictures.








i used a different material for the triple barrel coz its easier to use, lighter weight and easy to mod.
i keep my mods simple.