lambchop

To deal with my singled longshots safety issues i made a notch in my longshots shell. This helps because when you pull the priming handle back you can turn it on its side and place it into the hole. Now even if the catch does fail you will be saved and the priming handle will go no where.

--Comprehensive Testing--

All I can say is that I'm surprised. For what it's worth, I'm using Home Depot quality Frost King 3/8" Foam Backer Rod, and a brass barrel that is very tight on the darts. I also notice that, from your picture, you appear to be using washer darts (which you said you were) as well as cut darts with holes melted in them as well. I tried a combination of both...it failed miserably. But perhaps your results are different. I don't have enough of an arsenal to do the sort of extensive testing that many of the members of this forum are no doubt able to do.

I'm sorry to hear it didn't work for you, though.

He is using 3/8 foam whitch results in less drag. So because of this it is harder to compare.

Wow this is very interesting but doesn't it bring down the durability of the dart? Either way if it works it works. Nice first post.

Well here is a link to the page of pipe cutters. The first one is 14.99 and it looks exactly the same as the one at homedepot for $145. The link to pipe cutters.

Well here is something you can look at The long list of nerfers. im lucky because i live in new jersey. But i hope i could help.