i lost the catch to my longshot and was wondering if any one has the dimensions so that i could make one out of sheet plastic. if any one has one spare that they can take 5 minuts and measure that would be really helpfull.
captian slug. i might need help if your reading this on how to do that and if you could do that could you make me one?
hey i was at goodwill and found a sneakshot. it was broken so the clerk gave it to me for $.69. for that reason i was not afraid to break(again). the problem with the gun is the gears were popping. you will understand later on in the guide.
the gun without modding has the yellow barrel which moves around so you can shoot at a 90 degree angle.
then open the gun up and the first thing you can do is pull the barrel out. (it came out without any problem for me) http://i363.photobuc...ds/P1000674.jpg (you can see the gears here, they are white.
next I improved the seal on the plunger rod by using craft foam which i just pulled off of a big bad bow arrow. i used one of the fins. then i taped it on with masking tape. http://i363.photobuc...ds/P1000678.jpg
then to get the new barrel i used 1/2 inch cpvc which i love because i can get 20 ft for about 3 bucks but to insert the barrel i had to dremel out some of the shell. http://i363.photobuc...ds/P1000679.jpg
Hey i was just given a Nerf Sneakshot from a friend and its pretty old and i wouldn't call it good. The ranges are about 15 ft and i was wondering before i mod it, is it worth any money? Will i lose alot of money by cutting up the shell? ya i lost alot of money by cutting up a st9000.