Nero121

I don't really know if this counts as a homemade, but I stuck a long piece of 1/2" PVC on a Poland Spring water bottle (the kind with the pull out caps) and stuck a dart in the back of the PVC. I stuck the gun under my arm and *WHAM!*. The dart (to my suprise) shot really far. I didn't do much with this, cause it was late, but the ranges were quite remarkable. I think, for all those on a low budget, this could be the next big shotgun (if you load in multible bullets). Try it out yourselves, and see what you thing!
Disclaimer: This idea seems so simple, that I apolagize if I've just restated something previously known to the rest of the forum.

Hey, I hear all the time on the Forums about how people's NF are amazing. That's okay, I love my NF too. But they say they get ranges of up to 75 with the NF. I am only getting around 50. I replaced the spring and drilled through those 2 front pieces. And added a new barrel too. Any other suggestions? I've been through a fair amount of NF topics looking for the answer. I though O-Rings (bigger) might help but I'm not sure. Please respond. Thank you!

I was at my local CVS (picking up on sale easter candy ) and I saw one of those 'Stomp Rockets'. Basically, there is a big air bladder that is connected through some tubing to a plastic pipe. Someone jumps on the bladder and the rocket (which goes on the plastic pipe) flies off. I got thinking, 'Could that be any good?' I am sadly broke so I couldn't get it, but It seems simple enough to replace the plastic pipe with some PVC. I was wondering if anyone has tryed this, and if so, how's it work?

I was taking a look at the homemade designs in NH and found Unkowns Breech Barrel. I thought 'Hey, that looks easy to do, and I have the supplies right at hand too.' So I started making one. But half way through (I had cut out the rectangle from the 1" PVC) I thought 'HOw is the dart going to get in the 1/2" PVC if they are both on the foam?

EDIT: the Diagram got messed up.

The Dart is running into the 1/2" PVC pipe in the 1" PVC. Am I missing something obvious?

This is my first post, so bear with me. My at2k airtank was damaged. I was wondering if anybody new a way to fix it, or if new air tanks can be made. Sorry for the noobish questions.