wangsoup

I got the idea to post this after I finished the mod and it worked, so Most of the pieces are already put together, but I think it's not to difficult to understand whats going on so...

Open up your LS

Notice the copper? That's really the only difference between this and Ice singling your LS.

Get the plunger tube open and cut the bolt down like so


Now, get your copper, and put it into the back piece of the bolt you just cut of, fill the empty space with hot glue


Look down at the bolt like this and dremel two slots for the wire to go into, I also have foam on the back of this piece to reduce stress on the plunger head


Take a piece of cpvc big enough for you to hold in your hand, fill one end with hot glue like so


Reassemble the gun to look like my first picture, and put on the other half of the shell

To load darts, I pull of my front barrel and but them in like this

Mine can hold four darts

Before you go and mock me for my all black gun, let me explain. This gun was originally singled, and painted two or three years ago, and I couldn't stand the combination of those two noobish qualities anymore, so I tried to restore to LS's primary feature, which is ROF.

This gun doesn't exactly work perfectly, it's very finicky about darts, and requires a very tight fitting cpvc dart
to cut down on misfires.

If you see any mistakes, point them out to me. Also my apologies for the picture quality, and if you can't understand what's going on, send me a PM