Find content
Alright folks, its time.
What: Nerf war and Mod party
When: THIS SUNDAY!! May 23rd.
Where: Topeka, pm me for address.
Who:
Attending- Me
Maybe-
Hopefully- Equilox, homestarune, kieth, and collective. Oh and black slate.
MOD PARTY NIGHT BEFORE!!
Pm me for details, if I want you there I will respond asap.
ace of nerf
Member Since 31 Aug 2008Offline Last Active Jun 12 2010 03:43 PM
Topics I've Started
Dtb Modification
27 May 2009 - 10:38 PM
Hey guys, here is a write-up on how to mod your dart tag blaster.
1) Take out all your screws. The screws in the cocking bar are different sized, so keep them separated. Here is what the internals look like.
2) Take out the turret.
3) Remove all screws from the back.
4) Take apart your turret, here is what it should look like.
5) Take these pieces out of the turret. The spring, and the three pronged disc. What is on the ground should be thrown away.
6) Now take these pieces out of the turret.
7) Use wire cutters to cut the prong. All you have left is the disc.
8) Use sandpaper to sand down what's left of the prong.
Here are your finished air restrictors.
9) Put your air restrictors back into the turret.
10) Take an ACE #49 spring and mark 1 inch from one end.
11) Cut the mark so the spring is 1 inch shorter. Here is the finished spring.
12) Now take these pieces out of the gun.
Here are the parts taken apart.
13) Take the old spring off. ( Keep it, it works wonders in mavericks.) Put the cut down #49 spring on. Here is a photo of the plunger rod with the new spring.
1) Take out all your screws. The screws in the cocking bar are different sized, so keep them separated. Here is what the internals look like.
2) Take out the turret.
3) Remove all screws from the back.
4) Take apart your turret, here is what it should look like.
5) Take these pieces out of the turret. The spring, and the three pronged disc. What is on the ground should be thrown away.
6) Now take these pieces out of the turret.
7) Use wire cutters to cut the prong. All you have left is the disc.
8) Use sandpaper to sand down what's left of the prong.
Here are your finished air restrictors.
9) Put your air restrictors back into the turret.
10) Take an ACE #49 spring and mark 1 inch from one end.
11) Cut the mark so the spring is 1 inch shorter. Here is the finished spring.
12) Now take these pieces out of the gun.
Here are the parts taken apart.
13) Take the old spring off. ( Keep it, it works wonders in mavericks.) Put the cut down #49 spring on. Here is a photo of the plunger rod with the new spring.
Abbaton Two, Kansas Nerf War
09 May 2009 - 08:39 PM
What are you trying to accomplish by hosting abbaton two? Eh, pure Effeminateness. ( Inside joke from the first Abbaton )
What:
A nerf war that all midwesterns should come too.
Why:
Great practice for the SOF war in August. The abbatons might be the only midwest wars until August.
When:
May 30th. Everyone should be out of school and ready for some good ol' nerfing.
Probably start at 11:00 A.M. and end at 5ish P.M.
Where:
Topeka, KS
3630 Blue Inn Rd.
The location is on lake sherwood. We will be using an empty lot ( pictured below ) and homemade barriers will be used. Similar to the barriers at Massacre.
Who:
Definite -
Ace Of Nerf
Tornado13
Fed
Drew
Keith
Homestarune
Equilox
Maybe -
Matt
Hopeful's, but probably won't come-
What:
A nerf war that all midwesterns should come too.
Why:
Great practice for the SOF war in August. The abbatons might be the only midwest wars until August.
When:
May 30th. Everyone should be out of school and ready for some good ol' nerfing.
Probably start at 11:00 A.M. and end at 5ish P.M.
Where:
Topeka, KS
3630 Blue Inn Rd.
The location is on lake sherwood. We will be using an empty lot ( pictured below ) and homemade barriers will be used. Similar to the barriers at Massacre.
Who:
Definite -
Ace Of Nerf
Tornado13
Fed
Drew
Keith
Homestarune
Equilox
Maybe -
Matt
Hopeful's, but probably won't come-
